From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Tue, 30 Jan 2001 16:35:38 -0500 From: Daniel Eisenbud To: Michael Schmitz Cc: Michael Schmitz , linuxppc-dev@lists.linuxppc.org Subject: Re: mesh SCSI bus locks hard on 7500 when burning a CD-R in dao mode Message-ID: <20010130163538.A22219@allspice.cs.swarthmore.edu> References: <20010129182034.A25828@allspice.cs.swarthmore.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: ; from schmitz@zirkon.biophys.uni-duesseldorf.de on Tue, Jan 30, 2001 at 10:28:25PM +0100 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: On Tue, Jan 30, 2001 at 10:28:25PM +0100, Michael Schmitz wrote: > The big question: why does this particular command time out in the first > place? Does the target expect more data to be sent? Does the target just > crash and fails to release the bus? It seems to work on other host > adapters, doesn't it? There's a report of excatly the same failure mode on mac53c94 with a different brand (Sony, as opposed to Yamaha on my MESH) of DVD drive. So the only points in common seem to be that the DVD drives are running on mac hardware and that the drivers are written by Paul Mackerras. :-) I don't at all mean to impugn Paul's coding ability, which is obviously excellent, but the fact that he wrote both the drivers may mean that they share lots of code and possibly share the same bug. -Daniel -- Daniel E. Eisenbud eisenbud@cs.swarthmore.edu ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/