* How to enable 2 ethernet ports ??
@ 2001-03-01 21:40 Arturo Nunez
2001-03-01 21:47 ` Dan Malek
0 siblings, 1 reply; 2+ messages in thread
From: Arturo Nunez @ 2001-03-01 21:40 UTC (permalink / raw)
To: ppc
Hello:
I have the following board:
RPX CLLF
Cpu:XPC860TZ
Part Number:cllf60tzb16eb1nabw
These Board has 2 ports:
10 and 100 mbps
I have a questions about these board:
- How to compile the kernel in orther to have both ports
recognized ??
Regards
Arturo Nunez
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: How to enable 2 ethernet ports ??
2001-03-01 21:40 How to enable 2 ethernet ports ?? Arturo Nunez
@ 2001-03-01 21:47 ` Dan Malek
0 siblings, 0 replies; 2+ messages in thread
From: Dan Malek @ 2001-03-01 21:47 UTC (permalink / raw)
To: Arturo Nunez; +Cc: ppc
Arturo Nunez wrote:
> These Board has 2 ports:
> 10 and 100 mbps
The 10 Mbit port is SCC1, the 10/100 is FEC. Just select them
in the configuration process.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-03-01 21:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-03-01 21:40 How to enable 2 ethernet ports ?? Arturo Nunez
2001-03-01 21:47 ` Dan Malek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).