From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Tue, 24 Jul 2001 21:13:45 +0200 From: Olaf Hering To: Matt Porter Cc: Rudolf Ladyzhenskii , "PPC-Linux list (E-mail)" Subject: Re: 2.4.6 kernel on MCP750 board Message-ID: <20010724211345.B20688@suse.de> References: <619D608DD3F0D311882C009027732E1A35320B@ntserver.act.domain> <20010719113849.A30665@cx258813-a.chnd1.az.home.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20010719113849.A30665@cx258813-a.chnd1.az.home.com>; from mmporter@home.com on Thu, Jul 19, 2001 at 11:38:49AM -0700 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Thu, Jul 19, Matt Porter wrote: > > On Wed, Jul 18, 2001 at 09:54:41AM +1000, Rudolf Ladyzhenskii wrote: > > > > Hi, all > > > > I am trying to put the latest kernel on Motorola MCP750 card. 2.2 kernel > > used to work fine, but 2.4.6 have some PCI problems. > > It can not allocate resources to network interface and, as a result, I can > > not boot. > > Startup dump attached. > > The PCI subsystem is shooting itself in the foot when it sees a P2P > bridge with I/O and Mem windows disabled. That's the case when you > plug in a system master (that uses a transparent bridge to cPCI) in > by itself. A peripheral card in any slot will avoid the issue. > > Apply the following patch (current linuxppc_2_4_devel / 2.4.7pre8) to > cure the problem: That fixed my mtx+, thanks :) Changeset 1.152 in _2_4 broke it. Gruss Olaf -- $ man clone BUGS Main feature not yet implemented... ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/