From mboxrd@z Thu Jan 1 00:00:00 1970 To: Kapil Konde Cc: linuxppclist Subject: Re: Installing rtlinux on mpc860 board From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Tue, 07 Aug 2001 18:17:21 +0530." <3B6FE359.29C966C5@yahoo.com> Date: Tue, 07 Aug 2001 15:03:00 +0200 Message-Id: <20010807130305.B735610CB8@denx.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <3B6FE359.29C966C5@yahoo.com> you wrote: > > I am new to rtlinux. I want to install rtlinux on mpc860 board. > I have a mpc860T mdppro board. Can somebody guide me on which rtlinux I > should use and what are the steps that I will require to perform to > install the rtlinux on board. We have a patch for RTLinux-3.0 on our FTP server, as well as a kernel that is known to work with this patch (there are other, newer kernel versions as well, but these might need a little work adapting the patch). Included with the patch comes a `README.DENX' with detailed description of the patch and installation procedure. Please note that there is also a patch for RTAI-24.1.4. We will maintain RTAI support in the future, but may (or may not) drop support for RTLinux (no technical reasons, just because of the patent issue). Please see: ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-05-12.tar.bz2 ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtlinux-3.0-denx.tar.bz2 ftp://ftp.denx.de/pub/LinuxPPC/usr/src/rtai-24.1.4-denx.tar.bz2 and maybe: ftp://ftp.denx.de/pub/LinuxPPC/usr/src/linux-2.4.4-2001-07-23.tar.bz2 Hope this helps, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Weekends were made for programming. - Karl Lehenbauer ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/