From mboxrd@z Thu Jan 1 00:00:00 1970 To: "Gerhard TAEUBL" Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: MPC860(T) uart SCCs In-Reply-To: Your message of "Tue, 18 Sep 2001 13:02:06 +0200." Mime-Version: 1.0 Content-Type: text/plain Date: Thu, 20 Sep 2001 09:23:56 +0200 From: Wolfgang Denk Message-Id: <20010920072402.0C0991009C@denx.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi, > Iwork with an custom board MPC860T kernel 2.4.5. I will use all 4 SCC as uart RS485/RS232. The problem is, that SCC1 and SCC2 works fine and SCC3 and SCC4 not: See our kernel version on ftp://ftp.denx.de/pub/LinuxPPC/usr/src . The uart driver included works on all 6 possible serial ports (2 x SMC, 4 x SCC) simultaneous, with support for hardware flow controll on all 4 SCC ports. I've sent a patch for current kernel versions (2.4.10-pre?) to Tom Rini several days ago. Don't know when it will make it into the official source tree, if ever. Wolfgang Denk ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/