From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <200110042105.QAA14178@lists.linuxppc.org> From: "Boerner, Brian" To: "'Peter Desnoyers'" , linuxppc-embedded@lists.linuxppc.org Subject: RE: GDB + VisionICE? Date: Thu, 4 Oct 2001 17:09:46 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I would contact your wrs fae. I've heard through the grapevine that some beta firmware exists (it may be released firmware now) that supports the MMU. I couldn't find it in my mail but it was something like: MMU=LINUX It might be worth exploring. I've also had good luck with the AMC PowerTAP product as well. But that's neither here nor there. -bmb >-----Original Message----- >From: Peter Desnoyers [mailto:pdesnoyers@chinook.com] >Sent: Wednesday, October 03, 2001 12:21 PM >To: linuxppc-embedded@lists.linuxppc.org >Subject: GDB + VisionICE? > > > >[this is a resend - I sent it with an incorrect from: address, and it >didn't make it to the list] > >Has anyone configured GDB to work with a VisionICE II for a powerpc >target?It looks like the remote-est target is close, but only works >for m68k targets. It might not be much work to adapt it for powerpc, >which leads to the second question: > >Is this a pointless exercise due to the lack of VisionICE support for >the >MMU, or would it be worthwhile? > >Thanks, >-- >..................................................................... > Peter Desnoyers (781) 457-1165 pdesnoyers@chinook.com > Chinook Communications (617) 661-1979 pjd@fred.cambridge.ma.us > 100 Hayden Ave, Lexington MA 02421 > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/