From: "Sarnath Kannan" <sparc64@rediffmail.com>
To: "Dan Malek" <dan@embeddededge.com>
Cc: linuxppc-embedded@lists.linuxppc.org
Subject: Re: Re: IDE in Mode 1 (Sandpoint) how ?
Date: 13 Nov 2001 04:07:07 -0000 [thread overview]
Message-ID: <20011113040707.18867.qmail@mailweb26.rediffmail.com> (raw)
Hi,
> Sounds like you have the switches in the wrong position
> and the interrupts
> are not routed correctly. The serial port will
> eventually time out when it
> doesn't receive interrupts, giving the perception of a
> very slow running system.
>
> Just keep in mind the troubles are local to your
> configuration, as this software
> operates fine on a properly configured board. Just
> move switches until it works,
> then leave them alone :-).
Ur suggestion is acceptable. But whatss troubling
my head is, the kernel boots up fine until the NFS mount.
Had the switch settings been wrong, the serial output
would be slow from early bootup, right ? But thats
not the case. Why should it be slow after INIT starts
up ?
Meanwhile, I am also trying the same with different
switch settings.
Thanks
Sarnath
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2001-11-13 4:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-13 4:07 Sarnath Kannan [this message]
2001-11-13 5:25 ` IDE in Mode 1 (Sandpoint) how ? Dan Malek
-- strict thread matches above, loose matches on Subject: below --
2001-11-13 8:17 Sarnath Kannan
2001-11-14 3:00 Sarnath Kannan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011113040707.18867.qmail@mailweb26.rediffmail.com \
--to=sparc64@rediffmail.com \
--cc=dan@embeddededge.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).