From mboxrd@z Thu Jan 1 00:00:00 1970 To: "Williams, Kevin M." Cc: linuxppc-embedded Subject: Re: Abatron BDI2000 From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Tue, 20 Nov 2001 11:36:40 EST." Date: Tue, 20 Nov 2001 18:13:15 +0100 Message-Id: <20011120171320.8601DF9B9@denx.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Dear Kevin, in message you wrote: > > I just received a BDI2000 and it works great for debugging my bootrom, but > I'm a little confused about settings to use for debugging the > kernel...seeing a working example should be enough to get me going. Oops??? The config file for the BDI2000 depends on the processor architecture and board used, but that's it. You can use the SAME config file both for firmware and for Linux kernel debugging. Make sure you've RTFM about the "MMU XLAT" and the "PTBASE" settings. Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Computers are not intelligent. They only think they are. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/