From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benjamin Herrenschmidt To: , harry eaton Subject: Re: No video or console with 2.4.10 on Tanzania Date: Mon, 31 Dec 2001 00:04:23 +0100 Message-Id: <20011230230423.20339@smtp.noos.fr> In-Reply-To: <000901c19168$de54a4c0$6400a8c0@hwrd1.md.home.com> References: <000901c19168$de54a4c0$6400a8c0@hwrd1.md.home.com> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: > >> I'm trying to upgrade to a 2.4.x based kernel, but it's not working. >> Everything appears to stop after "arch: exit" is displayed, but >> in fact the whole booting process continues fine, except nothing >> is ever sent again to the screen. The log file reveals: >> ... >> Fixups for bus 01 >> Unknown bridge resource 0: assuming transparent >> ... >> PCI:00:11.0:Resource 0: 81000000-81ffffff (f=3D200) >> PCI:Cannot allocate resource region 0 of device 00:11.0 >> ... >> PCI: Failed to allocate resource 0 (8000-7ffffff) for 00:11.0 >> >> plus other similar message about devices 00:10.0 and 00:0e.0 >> >> I've tried Benh's latest from ppckernel.org, also the bitkeeper 2.4 = >> stable, >> plus a few others, even rolling my own minimal kernel from the 2.4.10 >> source tree in the latest YDL distribution. They all do the same thing. >> >> This is on my Starmax 4160 (Tanzania) system. I use the built-in video >> (ATI 264 vt) and it all works great with 2.2 kernels. Please, send me the complete boot log under both 2.2 and 2.4, and the result of lspci -vv (run as root) on both kernels. Ben. ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/