From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <200201171036.EAA02575@lists.linuxppc.org> Date: Thu, 17 Jan 2002 18:37:27 +0800 From: =?GB2312?Q?=D7=DE=CC=CE?= To: "linuxppc-embedded@lists.linuxppc.org" Subject: mppmc8240:how to turn PROGMODE mode on? Mime-Version: 1.0 Content-Type: text/plain; charset="GB2312" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: hello: i use sandpoint3 and mppmc8240(unity ). When i use fupdate to write linux kernel into flash. DINK32_KAHLUA >>fu -l 100000 FF700000 100000 PPMC Local Flash Programmer Are you sure? y Check flash type: Unknown, Manu. 90, Device 4c Make sure the PROGMODE switch is ON ERROR : FLASH error. i read the unity_x2.pdf carefully. but i can't find the PROGMODE switch.There are only two switch on the process board. One is sw2 ,the other is sw3. The sw2 is "system speed setting" .My setting is "01111",(1 means on,right). the sw3 is "user configuration setting". My setting is "10010" position value mean sw3-1 1 pci bus ROM location sw3-2 0 independant free agent sw3-3 0 map B(chrp) memory map sw3-4 1 enable debug sw3-5 0 disable local reset Do i ignore something? Could you give me some advice? Thanks for you help. 　　　　　　　　　　　　　　stone@pocketix.com 　　　　　　　　　　　　　　　　　2002-01-17 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/