From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Sun, 27 Jan 2002 16:27:37 -0800 From: Tim Moss To: linuxppc-dev@lists.linuxppc.org Subject: 2.4.18-pre7-ben0 MESH SCSI error Message-ID: <20020128002737.GC10356@hmpiii2.trinity200.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: I just got around to upgrading the kernels on my 9500/180 and 9500/132 to 2.4.18-pre7-ben0 from benh 2.4.14-ben0. I use the exact same kernel on both machines and 2.4.14-ben0 has been working fine. On the 9500/180, 2.4.18-pre7-ben0 works well so far but it won't boot on the 9500/132. It loads the MESH driver and then just continues spitting out this message until I turn the machine off mesh: SCSI bus reset detected: waiting for end...done Any idea how to get this working on the 9500/132? Thanks -- ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/