* 2.4.18-pre7-ben0 MESH SCSI error
@ 2002-01-28 0:27 Tim Moss
0 siblings, 0 replies; only message in thread
From: Tim Moss @ 2002-01-28 0:27 UTC (permalink / raw)
To: linuxppc-dev
I just got around to upgrading the kernels on my 9500/180 and 9500/132
to 2.4.18-pre7-ben0 from benh 2.4.14-ben0. I use the exact same kernel
on both machines and 2.4.14-ben0 has been working fine. On the 9500/180,
2.4.18-pre7-ben0 works well so far but it won't boot on the 9500/132. It
loads the MESH driver and then just continues spitting out this message
until I turn the machine off
mesh: SCSI bus reset detected: waiting for end...done
Any idea how to get this working on the 9500/132?
Thanks
--
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-01-28 0:27 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-01-28 0:27 2.4.18-pre7-ben0 MESH SCSI error Tim Moss
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).