From mboxrd@z Thu Jan 1 00:00:00 1970 To: Tzahi Oved Cc: "'linuxppc-embedded@lists.linuxppc.org'" Subject: Re: ppcboot 1.1.4 & MPSC From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Tue, 26 Feb 2002 10:25:46 +0200." <20083A3BAEF9D211BDB600805F8B14F3010A15AB@NTSERVER> Date: Tue, 26 Feb 2002 14:18:19 +0100 Message-Id: <20020226131824.EE0B6109E3@denx.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <20083A3BAEF9D211BDB600805F8B14F3010A15AB@NTSERVER> you wrote: > > I'm trying to work with the internal uart (MPSC) on the Galileo EVB64260 > board. When I set the definition CONFIG_MPSC in the EVB64260 config file > (which supposed to set the terminal to work on the MPSC) I'm not getting any > response on my console, do I need to configure anything else ?? any This can be anything, like just bad baudrate settings. You need to be more specific about your setup. And you have better chances for a useful reply on the ppcboot-users mailing list. Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Cole's Law: Thinly sliced cabbage. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/