From mboxrd@z Thu Jan 1 00:00:00 1970 To: "Walser, Martin" Cc: "'linuxppc-embedded@lists.linuxppc.org'" Subject: Re: enet rx doesn't work From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Tue, 12 Mar 2002 10:42:22 EST." <8D4C69676E66D511A1CB00508BBBB1921BCF0C@ranmx1.ran.harris.com> Date: Tue, 12 Mar 2002 17:35:43 +0100 Message-Id: <20020312163548.2EDEE10BF3@denx.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <8D4C69676E66D511A1CB00508BBBB1921BCF0C@ranmx1.ran.harris.com> you wrote: > > I've tried to use the enet over the LXT905. Tx seems to work, but I'm not able > to receive data from it. > I've measured the rxd, rclk and rena pins (the RENA signal is aktive high), but > they seems to be ok too. > > But I get no rx interrupt, the scc_enet_interrupt is never called when receiving > data. Checked the pin configuration and the clock routing? Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de There's another way to survive. Mutual trust -- and help. -- Kirk, "Day of the Dove", stardate unknown ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/