* which kernel should I modify?
@ 2002-04-17 11:03 Dustin Byford
2002-04-17 14:53 ` Matt Porter
0 siblings, 1 reply; 2+ messages in thread
From: Dustin Byford @ 2002-04-17 11:03 UTC (permalink / raw)
To: linuxppc-embedded
I am about to start modifying a linux kernel to run on a custom mpc8240 board
that has a uart, boot rom, a pair of amd 32Mbit roms, and a PCI bus. It is
intended to act as an IP router.
I was wondering, can anyone recommend which kernel tree I should start with?
Should I begin with the standard PPC 2.4 tree or the 2.4_devel tree?
Thanks
--Dustin
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: which kernel should I modify?
2002-04-17 11:03 which kernel should I modify? Dustin Byford
@ 2002-04-17 14:53 ` Matt Porter
0 siblings, 0 replies; 2+ messages in thread
From: Matt Porter @ 2002-04-17 14:53 UTC (permalink / raw)
To: Dustin Byford; +Cc: linuxppc-embedded
On Wed, Apr 17, 2002 at 05:03:29AM -0600, Dustin Byford wrote:
>
> I am about to start modifying a linux kernel to run on a custom mpc8240 board
> that has a uart, boot rom, a pair of amd 32Mbit roms, and a PCI bus. It is
> intended to act as an IP router.
>
> I was wondering, can anyone recommend which kernel tree I should start with?
> Should I begin with the standard PPC 2.4 tree or the 2.4_devel tree?
2_4_devel
--
Matt Porter
MontaVista Software, Inc.
mporter@mvista.com
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-04-17 14:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-04-17 11:03 which kernel should I modify? Dustin Byford
2002-04-17 14:53 ` Matt Porter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).