From mboxrd@z Thu Jan 1 00:00:00 1970 To: "Walser, Martin" Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: segmentation fault when using "signal" From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Mon, 22 Apr 2002 01:04:58 EDT." <8D4C69676E66D511A1CB00508BBBB1921BCF21@ranmx1.ran.harris.com> Date: Tue, 23 Apr 2002 00:00:13 +0200 Message-Id: <20020422220018.785C7FF61@denx.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <8D4C69676E66D511A1CB00508BBBB1921BCF21@ranmx1.ran.harris.com> you wrote: > > I've a probelm using the signal function. > I'm using Kernel 2.4.4 from Denx. When I install a signalhandler for SIGCHLD, I > get an segmentation fault, when the child process is finished. > > I've found out that this happens, when the function installed by signal returns. > > Any ideas? Bad cross tools, header files, and/or libraries... Works here... Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Any technology distinguishable from magic is insufficiently advanced. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/