From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 24 May 2002 20:09:53 -0700 From: Matt Porter To: Rajappa Iyer Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: P2P bridge (DEC 21154) initialization on MCP750 Message-ID: <20020524200953.A21781@home.com> References: <200205250114.g4P1ELi08721@panix1.panix.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <200205250114.g4P1ELi08721@panix1.panix.com>; from rsi@panix.com on Fri, May 24, 2002 at 09:14:21PM -0400 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Fri, May 24, 2002 at 09:14:21PM -0400, Rajappa Iyer wrote: > > I'm having problems with the PCI-PCI bridge (DEC 21154) on the MCP750 > and would appreciate any words of wisdom. Basically, this bridge does > not get initialized and therefore no devices are probed on the > secondary bus. > > I've tried all three kernel trees from source.mvista.com > (linuxppc_2_4, linuxppc_2_4_devel and linuxppc_2_5). The devel branch > does not get past the Bogomips calibration loop. The other two do not > initialize the bridge. > > Any ideas on how to fix this? Use _devel and start with the pplus port. 'make pplus_config' Although code still exists for the PowerPlus architecture boards within the legacy PReP port, it isn't maintained for those boards (except maybe for MTX). Regards, -- Matt Porter porter@cox.net This is Linux Country. On a quiet night, you can hear Windows reboot. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/