From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <20020531060244.15732.qmail@web11204.mail.yahoo.com> Date: Thu, 30 May 2002 23:02:44 -0700 (PDT) From: Sergiy Kovtun Subject: 64Mbytes on Sandpoint-X3B To: linuxppc-embedded@lists.linuxppc.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hello All, I try to connect all my 64 Meg memoty on Sandpoint-X3B, but received a crash( with 32M all OK). Source: SP-X3B + Altimus MPC7410 HHL 2.0 Any ideas?? TIA, Sergiy go 90000 loaded at: 00090000 000991B8 relocated to: 00800000 008091B8 zimage at: 00096000 001387F9 relocated to: 0080A000 008AC7F9 avail ram: 00400000 00800000 Linux/PPC load: console=ttyS0,9600 console=tty0 root=/dev/hdb2 ip=210.222.86.67:::255.255.255.192 Uncompressing Linux...done. Now booting the kernel Total memory = 64MB; using 256kB for hash table (at c01c0000) Linux version 2.4.2_hhl20 (root@sergiy) (gcc version 2.95.3 20010315 (release/MontaVista)) #2 Thu May 23 16:34:36 KST 2002 Motorola SPS Sandpoint Test Platform Sandpoint port (C) 2000, 2001 MontaVista Software, Inc. (source@mvista.com) On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,9600 console=tty0 root=/dev/hdb2 ip=210.222.86.67:::255.255.255.192 OpenPIC Version 1.2 (1 CPUs and 24 IRQ sources) at f7fd0000 OpenPIC timer frequency is 100.000000 MHz time_init: decrementer frequency = 24.359871 MHz Calibrating delay loop... 389.12 BogoMIPS Memory: 62388k available (1108k kernel code, 416k data, 192k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) VFS: Diskquotas version dquot_6.4.0 initialized POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 41389kB/13796kB, 128 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx W82C105: IDE controller on PCI bus 00 dev 59 W82C105: chipset revision 5 W82C105: 100% native mode on irq 17 ide0: BM-DMA at 0xbfffd0-0xbfffd7, BIOS settings: hda:pio, hdb:pio SL82C105 command word: 5 IDE timing: 00000909, resetting to PIO0 timing ide1: BM-DMA at 0xbfffd8-0xbfffdf, BIOS settings: hdc:pio, hdd:pio SL82C105 command word: 5 IDE timing: 000003e4, resetting to PIO0 timing hdb: QUANTUM FIREBALL EX6.4A, ATA DISK drive ide0 at 0xbffff8-0xbfffff,0xbffff6 on irq 14 hdb: 12594960 sectors (6449 MB) w/418KiB Cache, CHS=13328/15/63 Partition check: hdb: [PTBL] [784/255/63] hdb1 hdb2 hdb3 < hdb5 > loop: loaded (max 8 devices) Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ DETECT_IRQ SERIAL_PCI enabled ˙ttyS00 at 0x03f8 (irq = 0) is a 16550A ttyS01 at 0x02f8 (irq = 0) is a 16550A 3c59x.c:LK1.1.12 06 Jan 2000 Donald Becker and others. http://www.scyld.com/network/vortex.html $Revision: 1.102.2.46 $ See Documentation/networking/vortex.txt eth0: 3Com PCI 3cSOHO100-TX Hurricane at 0xbfff00, 00:04:76:d0:1c:56, IRQ 18 product code 'MM' rev 00.12 date 11-02-01 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 786d. Enabling bus-master transmits and whole-frame receives. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) eth0: using NWAY autonegotiation NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 192k init 4k openfirmware Oops: kernel access of bad area, sig: 11 NIP: C002B8E8 XER: 20000000 LR: C002B8BC SP: C0319B30 REGS: c0319a80 TRAP: 0300 MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: C6024078, DSISR: 40000000 TASK = c0318000[1] 'init' Last syscall: 6 last math c0318000 last altivec 00000000 GPR00: 00001032 C0319B30 C0318000 00000001 00009032 C0319B18 C0319B38 C3FE4000 GPR08: C0810018 C6024060 C0810018 000000A0 000493E0 00000000 7FFFFA40 3002A228 GPR16: 3002A5C8 00000001 0000013B C034E560 C03EF5A0 C0319B98 00000000 00000001 GPR24: 00000000 C034E560 C0362400 00000002 C0319B38 C0140000 C0144620 C0315444 Call backtrace: C00CB140 C00CFE00 C00D6064 C00D62DC C00D807C C00CDFE0 C0017128 C0003DA8 C001CAEC C001CC28 C000EA64 C0003D64 3000CB48 30004D30 30010EEC 30003880 300037AC 3001331C Kernel panic: Aiee, killing interrupt handler In interrupt handler - not syncing Rebooting in 180 seconds.. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/