From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Mon, 3 Jun 2002 15:19:57 -0700 From: Matt Porter To: sanjay k k Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: 64 bit PCI qlogic + ebony + 440 kernel Message-ID: <20020603151956.A13778@home.com> References: <20020603213540.29797.qmail@webmail8.rediffmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20020603213540.29797.qmail@webmail8.rediffmail.com>; from fren00@rediffmail.com on Mon, Jun 03, 2002 at 09:35:40PM -0000 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Mon, Jun 03, 2002 at 09:35:40PM -0000, sanjay k k wrote: > > Hi, > I have 64-bit PCI qlogic adapter , which works fine with 405 as it > detects 32 bit on 405. > When i tried to run the same code on ebony board with current 440 > kernel (development tree), it detects as a 32 bit PCI but gave all > junk data. I've tested ~14 different PCI(X) cards that all run fine. I've got 64-bit conventional PCI gige and PCI-X gige cards running at 66-133Mhz with no problems. Make sure you have the Ebony pci bus speed jumpers and firmware speed settings set properly for your card, it can be a little touchy sometimes. > Do i need to change any thing in qlogic driver code for 440 > kernel? You shouldn't. Regards, -- Matt Porter porter@cox.net This is Linux Country. On a quiet night, you can hear Windows reboot. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/