* old-world boot freeze; 2.4.19-rc2
@ 2002-07-20 5:10 Stefan Jeglinski
2002-07-20 18:05 ` Benjamin Herrenschmidt
0 siblings, 1 reply; 2+ messages in thread
From: Stefan Jeglinski @ 2002-07-20 5:10 UTC (permalink / raw)
To: linuxppc-dev
Just rsynced 2.4.19-rc2 from source.mvista.org (although official
kernel is at rc3?). Built fine, but when I try to boot it on a 9500
with a Powerlogix G3 upgrade, the last two things I see (early in the
boot) are:
setup_arch: enter
setup_arch: bootmem
And then it just locks up.
Any ideas? Last kernel I've been running on this is 2.4.18, with no problems.
Stefan Jeglinski
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: old-world boot freeze; 2.4.19-rc2
2002-07-20 5:10 old-world boot freeze; 2.4.19-rc2 Stefan Jeglinski
@ 2002-07-20 18:05 ` Benjamin Herrenschmidt
0 siblings, 0 replies; 2+ messages in thread
From: Benjamin Herrenschmidt @ 2002-07-20 18:05 UTC (permalink / raw)
To: Stefan Jeglinski, linuxppc-dev
>Just rsynced 2.4.19-rc2 from source.mvista.org (although official
>kernel is at rc3?). Built fine, but when I try to boot it on a 9500
>with a Powerlogix G3 upgrade, the last two things I see (early in the
>boot) are:
>
>setup_arch: enter
>setup_arch: bootmem
>
>And then it just locks up.
>
>Any ideas? Last kernel I've been running on this is 2.4.18, with no problems.
I works fine on a 8500 SMP here (with no G3 upgrade though). Can you
try routing printk to the btext engine ?
(use my tree and add printkbext to the command line)
Tell me what are the last messages.
Ben.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-07-20 18:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-07-20 5:10 old-world boot freeze; 2.4.19-rc2 Stefan Jeglinski
2002-07-20 18:05 ` Benjamin Herrenschmidt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).