* Re: console problem
[not found] ` <200207211506.57760.ADharankar@ATTBI.Com>
@ 2002-07-23 19:13 ` Mark Chambers
2002-07-26 1:00 ` Arun Dharankar
0 siblings, 1 reply; 2+ messages in thread
From: Mark Chambers @ 2002-07-23 19:13 UTC (permalink / raw)
To: Arun Dharankar; +Cc: linuxppc-dev
Hi Arun,
I've got a question about your situation: If you have no terminal attached
to your system, how do you know what Linux is doing? Or to put it
conversely, how do you know that it's failing? Are you sure the problem is
really related to removing the cable or do you change something else to run
without a terminal?
I have seen my code hang in the very same place - but it did it whether a
cable was attached or not, because the UART was not set up correctly.
Mark Chambers
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: console problem
2002-07-23 19:13 ` console problem Mark Chambers
@ 2002-07-26 1:00 ` Arun Dharankar
0 siblings, 0 replies; 2+ messages in thread
From: Arun Dharankar @ 2002-07-26 1:00 UTC (permalink / raw)
To: Mark Chambers; +Cc: linuxppc-dev
Hi Mark,
When I use the BDI2000 to find out what the board is doing, I can
see the place where the PPCBoot and Linux will hang. As for debugging
the problem, I mentioned my conclusion in reply to another post.
Thanks for your followup!
Best regards,
-Arun.
On Tuesday 23 July 2002 03:13 pm, Mark Chambers wrote:
> Hi Arun,
>
> I've got a question about your situation: If you have no terminal attached
> to your system, how do you know what Linux is doing? Or to put it
> conversely, how do you know that it's failing? Are you sure the problem is
> really related to removing the cable or do you change something else to run
> without a terminal?
>
> I have seen my code hang in the very same place - but it did it whether a
> cable was attached or not, because the UART was not set up correctly.
>
> Mark Chambers
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-07-26 1:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <5.1.0.14.0.20020719083530.00a11d50@raven-villages.net>
[not found] ` <200207211506.57760.ADharankar@ATTBI.Com>
2002-07-23 19:13 ` console problem Mark Chambers
2002-07-26 1:00 ` Arun Dharankar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).