linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Narendra  " <narengh@rediffmail.com>
To: linuxppc-embedded@lists.linuxppc.org
Subject: CS_BAD_VCC Error during Card Configaration.
Date: 5 Aug 2002 04:30:39 -0000	[thread overview]
Message-ID: <20020805043039.4380.qmail@webmail6.rediffmail.com> (raw)


Hi.

I am involved in porting WLAN driver to Embedded Planet RPX-LITE
board.

I am using HHL - 2,4,2 and Pcmcia-cs (3.1.24). When i insert
D-Link DWL 350 prism2 card (intersil) my driver is invoked by
cardmgr.

But as i found through debug message, socket is configured for
5volts and the CIS read from my card wants 3.3V. So my Config()
routine is failing since there is a mismatch in configured Vcc and
Requested Vcc. and Kernel is crashing.

Where i need to do modification to configure EP socket for 3.3v?

Should i need to make any modification in m8xx_pcmcia.c?

I didn`t come across this problem when i tested my driver in
Compaq Armada notebook.

I am struck at this point. All inputs are welcome.

Thanks in advance,

Regards,
Naren


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

             reply	other threads:[~2002-08-05  4:30 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-08-05  4:30 Narendra   [this message]
2002-08-05  5:27 ` CS_BAD_VCC Error during Card Configaration David Gibson
2002-08-05  6:42 ` Michael Habermann
  -- strict thread matches above, loose matches on Subject: below --
2002-08-06 11:31 Narendra  
2002-08-06 14:53 ` Michael Habermann
2002-08-07 10:44 Narendra  
2002-08-07 18:34 ` Michael Habermann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20020805043039.4380.qmail@webmail6.rediffmail.com \
    --to=narengh@rediffmail.com \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).