* FCC patch..really
@ 2002-08-28 0:08 Allen Curtis
2002-08-28 3:52 ` Dan Malek
0 siblings, 1 reply; 5+ messages in thread
From: Allen Curtis @ 2002-08-28 0:08 UTC (permalink / raw)
To: dan; +Cc: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 86 bytes --]
--
All things come to those who wait. Some of us just have to wait a little
longer...
[-- Attachment #2: fcc.patch --]
[-- Type: text/x-diff, Size: 9084 bytes --]
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux 2.4 for PowerPC development tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.1115 -> 1.1116
# arch/ppc/8260_io/fcc_enet.c 1.15 -> 1.16
# arch/ppc/8260_io/Config.in 1.9 -> 1.10
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 02/08/26 acurtis@ws01.onz.com 1.1116
# Added ability to configure the 8260 clocks used by FCC ethernet.
# --------------------------------------------
#
diff -Nru a/arch/ppc/8260_io/Config.in b/arch/ppc/8260_io/Config.in
--- a/arch/ppc/8260_io/Config.in Tue Aug 27 16:24:40 2002
+++ b/arch/ppc/8260_io/Config.in Tue Aug 27 16:24:40 2002
@@ -2,6 +2,16 @@
# MPC8260 Communication options
#
mainmenu_option next_comment
+
+comment 'MPC8260 Options'
+bool 'Disable data cache' CONFIG_DCACHE_DISABLE
+bool 'Use TMCNT for RTC' CONFIG_8260_RTC_TMCNT
+bool 'Enable local RAM support' CONFIG_8260_LRAM
+if [ "$CONFIG_8260_LRAM" = "y" ]; then
+ hex ' Local RAM base address' CONFIG_8260_LRAM_BASE 0xF7000000
+ hex ' Local RAM size' CONFIG_8260_LRAM_SIZE 0x00800000
+fi
+
comment 'MPC8260 CPM Options'
bool 'Enable SCC Console' CONFIG_SCC_CONSOLE
if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
@@ -19,8 +29,47 @@
bool 'CPM FCC Ethernet' CONFIG_FEC_ENET
if [ "$CONFIG_FEC_ENET" = "y" ]; then
bool 'Ethernet on FCC1' CONFIG_FCC1_ENET
+ if [ "$CONFIG_FCC1_ENET" = "y" ]; then
+ choice 'RX Clk Source' \
+ "CLK9 CONFIG_FCC1_RXCLK_CLK9 \
+ CLK10 CONFIG_FCC1_RXCLK_CLK10 \
+ CLK11 CONFIG_FCC1_RXCLK_CLK11 \
+ CLK12 CONFIG_FCC1_RXCLK_CLK12" CLK12
+ choice 'TX Clk Source' \
+ "CLK9 CONFIG_FCC1_TXCLK_CLK9 \
+ CLK10 CONFIG_FCC1_TXCLK_CLK10 \
+ CLK11 CONFIG_FCC1_TXCLK_CLK11 \
+ CLK12 CONFIG_FCC1_TXCLK_CLK12" CLK11
+ fi
bool 'Ethernet on FCC2' CONFIG_FCC2_ENET
+ if [ "$CONFIG_FCC2_ENET" = "y" ]; then
+ choice 'RX Clk Source' \
+ "CLK13 CONFIG_FCC2_RXCLK_CLK13 \
+ CLK14 CONFIG_FCC2_RXCLK_CLK14 \
+ CLK15 CONFIG_FCC2_RXCLK_CLK15 \
+ CLK16 CONFIG_FCC2_RXCLK_CLK16" CLK13
+ choice 'TX Clk Source' \
+ "CLK13 CONFIG_FCC2_TXCLK_CLK13 \
+ CLK14 CONFIG_FCC2_TXCLK_CLK14 \
+ CLK15 CONFIG_FCC2_TXCLK_CLK15 \
+ CLK16 CONFIG_FCC2_TXCLK_CLK16" CLK14
+ fi
bool 'Ethernet on FCC3' CONFIG_FCC3_ENET
+ if [ "$CONFIG_FCC3_ENET" = "y" ]; then
+ choice 'RX Clk Source' \
+ "CLK13 CONFIG_FCC3_RXCLK_CLK13 \
+ CLK14 CONFIG_FCC3_RXCLK_CLK14 \
+ CLK15 CONFIG_FCC3_RXCLK_CLK15 \
+ CLK16 CONFIG_FCC3_RXCLK_CLK16" CLK15
+ choice 'TX Clk Source' \
+ "CLK13 CONFIG_FCC3_TXCLK_CLK13 \
+ CLK14 CONFIG_FCC3_TXCLK_CLK14 \
+ CLK15 CONFIG_FCC3_TXCLK_CLK15 \
+ CLK16 CONFIG_FCC3_TXCLK_CLK16" CLK16
+ fi
+
+ bool 'Force FCC Full-Duplex Mode' CONFIG_FCC_FULL_DUPLEX
+
bool 'Use MDIO for PHY configuration' CONFIG_USE_MDIO
if [ "$CONFIG_USE_MDIO" = "y" ]; then
choice 'Type of PHY' \
@@ -31,7 +80,4 @@
fi
fi
fi
-
-comment 'Generic MPC8260 Options'
-bool 'Disable data cache' CONFIG_DCACHE_DISABLE
endmenu
diff -Nru a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c
--- a/arch/ppc/8260_io/fcc_enet.c Tue Aug 27 16:24:40 2002
+++ b/arch/ppc/8260_io/fcc_enet.c Tue Aug 27 16:24:40 2002
@@ -1,5 +1,5 @@
/*
- * BK Id: %F% %I% %G% %U% %#%
+ * BK Id: SCCS/s.fcc_enet.c 1.16 08/22/02 15:52:23 curtisa
*/
/*
* Fast Ethernet Controller (FCC) driver for Motorola MPC8260.
@@ -163,9 +163,41 @@
/* CLK12 is receive, CLK11 is transmit. These are board specific.
*/
-#define PC_F1RXCLK ((uint)0x00000800)
-#define PC_F1TXCLK ((uint)0x00000400)
-#define CMX1_CLK_ROUTE ((uint)0x3e000000)
+#define FCC1_RXCLK_SHIFT (31 - 4)
+#if defined(CONFIG_FCC1_RXCLK_CLK9)
+# define PC_F1RXCLK ((uint)0x00000100)
+# define FCC1_RXCLK ((uint)4 << FCC1_RXCLK_SHIFT)
+#elif defined(CONFIG_FCC1_RXCLK_CLK10)
+# define PC_F1RXCLK ((uint)0x00000200)
+# define FCC1_RXCLK ((uint)5 << FCC1_RXCLK_SHIFT)
+#elif defined(CONFIG_FCC1_RXCLK_CLK11)
+# define PC_F1RXCLK ((uint)0x00000400)
+# define FCC1_RXCLK ((uint)6 << FCC1_RXCLK_SHIFT)
+#elif defined(CONFIG_FCC1_RXCLK_CLK12)
+# define PC_F1RXCLK ((uint)0x00000800)
+# define FCC1_RXCLK ((uint)7 << FCC1_RXCLK_SHIFT)
+#else
+# define FCC1_RXCLK 0
+#endif
+
+#define FCC1_TXCLK_SHIFT (31 - 7)
+#if defined(CONFIG_FCC1_TXCLK_CLK9)
+# define PC_F1TXCLK ((uint)0x00000100)
+# define FCC1_TXCLK ((uint)4 << FCC1_TXCLK_SHIFT)
+#elif defined(CONFIG_FCC1_TXCLK_CLK10)
+# define PC_F1TXCLK ((uint)0x00000200)
+# define FCC1_TXCLK ((uint)5 << FCC1_TXCLK_SHIFT)
+#elif defined(CONFIG_FCC1_TXCLK_CLK11)
+# define PC_F1TXCLK ((uint)0x00000400)
+# define FCC1_TXCLK ((uint)6 << FCC1_TXCLK_SHIFT)
+#elif defined(CONFIG_FCC1_TXCLK_CLK12)
+# define PC_F1TXCLK ((uint)0x00000800)
+# define FCC1_TXCLK ((uint)7 << FCC1_TXCLK_SHIFT)
+#else
+# define FCC1_TXCLK 0
+#endif
+
+#define CMX1_CLK_ROUTE (FCC1_RXCLK | FCC1_TXCLK)
#define CMX1_CLK_MASK ((uint)0xff000000)
/* I/O Pin assignment for FCC2. I don't yet know the best way to do this,
@@ -187,9 +219,41 @@
/* CLK13 is receive, CLK14 is transmit. These are board dependent.
*/
-#define PC_F2RXCLK ((uint)0x00001000)
-#define PC_F2TXCLK ((uint)0x00002000)
-#define CMX2_CLK_ROUTE ((uint)0x00250000)
+#define FCC2_RXCLK_SHIFT (31 - 12)
+#if defined(CONFIG_FCC2_RXCLK_CLK13)
+# define PC_F2RXCLK ((uint)0x00001000)
+# define FCC2_RXCLK ((uint)4 << FCC2_RXCLK_SHIFT)
+#elif defined(CONFIG_FCC2_RXCLK_CLK14)
+# define PC_F2RXCLK ((uint)0x00002000)
+# define FCC2_RXCLK ((uint)5 << FCC2_RXCLK_SHIFT)
+#elif defined(CONFIG_FCC2_RXCLK_CLK15)
+# define PC_F2RXCLK ((uint)0x00004000)
+# define FCC2_RXCLK ((uint)6 << FCC2_RXCLK_SHIFT)
+#elif defined(CONFIG_FCC2_RXCLK_CLK16)
+# define PC_F2RXCLK ((uint)0x00008000)
+# define FCC2_RXCLK ((uint)7 << FCC2_RXCLK_SHIFT)
+#else
+# define FCC2_RXCLK 0
+#endif
+
+#define FCC2_TXCLK_SHIFT (31 - 15)
+#if defined(CONFIG_FCC2_TXCLK_CLK13)
+# define PC_F2TXCLK ((uint)0x00001000)
+# define FCC2_TXCLK ((uint)4 << FCC2_TXCLK_SHIFT)
+#elif defined(CONFIG_FCC2_TXCLK_CLK14)
+# define PC_F2TXCLK ((uint)0x00002000)
+# define FCC2_TXCLK ((uint)5 << FCC2_TXCLK_SHIFT)
+#elif defined(CONFIG_FCC2_TXCLK_CLK15)
+# define PC_F2TXCLK ((uint)0x00004000)
+# define FCC2_TXCLK ((uint)6 << FCC2_TXCLK_SHIFT)
+#elif defined(CONFIG_FCC2_TXCLK_CLK16)
+# define PC_F2TXCLK ((uint)0x00008000)
+# define FCC2_TXCLK ((uint)7 << FCC2_TXCLK_SHIFT)
+#else
+# define FCC2_TXCLK 0
+#endif
+
+#define CMX2_CLK_ROUTE (FCC2_RXCLK | FCC2_TXCLK)
#define CMX2_CLK_MASK ((uint)0x00ff0000)
/* I/O Pin assignment for FCC3. I don't yet know the best way to do this,
@@ -211,9 +275,41 @@
/* CLK15 is receive, CLK16 is transmit. These are board dependent.
*/
-#define PC_F3RXCLK ((uint)0x00004000)
-#define PC_F3TXCLK ((uint)0x00008000)
-#define CMX3_CLK_ROUTE ((uint)0x00003700)
+#define FCC3_RXCLK_SHIFT (31 - 20)
+#if defined(CONFIG_FCC3_RXCLK_CLK13)
+# define PC_F3RXCLK ((uint)0x00001000)
+# define FCC3_RXCLK ((uint)4 << FCC3_RXCLK_SHIFT)
+#elif defined(CONFIG_FCC3_RXCLK_CLK14)
+# define PC_F3RXCLK ((uint)0x00002000)
+# define FCC3_RXCLK ((uint)5 << FCC3_RXCLK_SHIFT)
+#elif defined(CONFIG_FCC3_RXCLK_CLK15)
+# define PC_F3RXCLK ((uint)0x00004000)
+# define FCC3_RXCLK ((uint)6 << FCC3_RXCLK_SHIFT)
+#elif defined(CONFIG_FCC3_RXCLK_CLK16)
+# define PC_F3RXCLK ((uint)0x00008000)
+# define FCC3_RXCLK ((uint)7 << FCC3_RXCLK_SHIFT)
+#else
+# define FCC3_RXCLK 0
+#endif
+
+#define FCC3_TXCLK_SHIFT (31 - 23)
+#if defined(CONFIG_FCC3_TXCLK_CLK13)
+# define PC_F3TXCLK ((uint)0x00001000)
+# define FCC3_TXCLK ((uint)4 << FCC3_TXCLK_SHIFT)
+#elif defined(CONFIG_FCC3_TXCLK_CLK14)
+# define PC_F3TXCLK ((uint)0x00002000)
+# define FCC3_TXCLK ((uint)5 << FCC3_TXCLK_SHIFT)
+#elif defined(CONFIG_FCC3_TXCLK_CLK15)
+# define PC_F3TXCLK ((uint)0x00004000)
+# define FCC3_TXCLK ((uint)6 << FCC3_TXCLK_SHIFT)
+#elif defined(CONFIG_FCC3_TXCLK_CLK16)
+# define PC_F3TXCLK ((uint)0x00008000)
+# define FCC3_TXCLK ((uint)7 << FCC3_TXCLK_SHIFT)
+#else
+# define FCC3_TXCLK 0
+#endif
+
+#define CMX3_CLK_ROUTE (FCC3_RXCLK | FCC3_TXCLK)
#define CMX3_CLK_MASK ((uint)0x0000ff00)
/* MII status/control serial interface.
@@ -1813,7 +1909,7 @@
ads_csr_addr[1] &= ~BCSR1_FETHIEN; /* Enable */
#endif
-#if defined(CONFIG_USE_MDIO) || defined(CONFIG_TQM8260)
+#if defined(CONFIG_USE_MDIO) || defined(CONFIG_TQM8260) || defined(CONFIG_FCC_FULL_DUPLEX)
/* start in full duplex mode, and negotiate speed
*/
fcc_restart (dev, 1);
@@ -1946,9 +2042,9 @@
fccp = fcp->fccp;
if (duplex)
- fccp->fcc_fpsmr |= FCC_PSMR_FDE;
+ fccp->fcc_fpsmr |= FCC_PSMR_FDE | FCC_PSMR_LPB;
else
- fccp->fcc_fpsmr &= ~FCC_PSMR_FDE;
+ fccp->fcc_fpsmr &= ~(FCC_PSMR_FDE | FCC_PSMR_LPB);
/* Enable transmit/receive */
fccp->fcc_gfmr |= FCC_GFMR_ENR | FCC_GFMR_ENT;
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: FCC patch..really
2002-08-28 0:08 FCC patch..really Allen Curtis
@ 2002-08-28 3:52 ` Dan Malek
2002-08-28 4:11 ` Allen Curtis
0 siblings, 1 reply; 5+ messages in thread
From: Dan Malek @ 2002-08-28 3:52 UTC (permalink / raw)
To: acurtis; +Cc: linuxppc-embedded
Allen Curtis wrote:
> + if [ "$CONFIG_FCC1_ENET" = "y" ]; then
> + choice 'RX Clk Source' \
Please don't do this.......it doesn't belong in the configuration
file. There are more things unique to a board configuration than
the clock routing. This belongs as a structure in a C file, selectable
by board type (along with other board specific selections).
Thanks.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: FCC patch..really
2002-08-28 3:52 ` Dan Malek
@ 2002-08-28 4:11 ` Allen Curtis
2002-08-28 5:29 ` Dan Malek
0 siblings, 1 reply; 5+ messages in thread
From: Allen Curtis @ 2002-08-28 4:11 UTC (permalink / raw)
To: Dan Malek; +Cc: linuxppc-embedded
> > + if [ "$CONFIG_FCC1_ENET" = "y" ]; then
> > + choice 'RX Clk Source' \
>
> Please don't do this.......it doesn't belong in the configuration
> file. There are more things unique to a board configuration than
> the clock routing. This belongs as a structure in a C file, selectable
> by board type (along with other board specific selections).
This may not be the right implementation but I believe it is the right
direction. Personally I am tired of looking at all the different board
specific implementations and conditional compile statements. How can we
accomplish the same thing without cluttering the code with platform stuff? I
think there needs to be an effort to define the kernel features and have the
configuration translate platform features into generic kernel features that
can be used by everyone. It doesn't do anyone any good to make them splunk
though the Linux source to find platform tweaks. (although it does help to
keep us contractors employed)
I have another update that does the same thing with the MDIO lines per PHY
;)
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: FCC patch..really
2002-08-28 4:11 ` Allen Curtis
@ 2002-08-28 5:29 ` Dan Malek
2002-08-28 14:43 ` Allen Curtis
0 siblings, 1 reply; 5+ messages in thread
From: Dan Malek @ 2002-08-28 5:29 UTC (permalink / raw)
To: acurtis; +Cc: linuxppc-embedded
Allen Curtis wrote:
> I have another update that does the same thing with the MDIO lines per PHY
> ;)
Please don't. This stuff doesn't belong in configuration files. There is
nothing wrong with creating platform specific configuration in files
that can be compiled and using a single configuration option and #define to
make this happen. Cluttered configuration scripts are a source of error
and headache.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: FCC patch..really
2002-08-28 5:29 ` Dan Malek
@ 2002-08-28 14:43 ` Allen Curtis
0 siblings, 0 replies; 5+ messages in thread
From: Allen Curtis @ 2002-08-28 14:43 UTC (permalink / raw)
To: Dan Malek; +Cc: linuxppc-embedded
> > I have another update that does the same thing with the MDIO
> lines per PHY
> > ;)
>
> Please don't. This stuff doesn't belong in configuration files. There is
> nothing wrong with creating platform specific configuration in files
> that can be compiled and using a single configuration option and
> #define to
> make this happen. Cluttered configuration scripts are a source of error
> and headache.
Ok but lets keep the #defines that control the FCC setup and put them into
the platform headers. If the defines are not present then they will default
to the "normal" configuration. Unfortunately with this method you are
required to modify each platform configuration file instead of having it
done as part of the configuration process. I am not sure which would be more
error prone.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2002-08-28 14:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-08-28 0:08 FCC patch..really Allen Curtis
2002-08-28 3:52 ` Dan Malek
2002-08-28 4:11 ` Allen Curtis
2002-08-28 5:29 ` Dan Malek
2002-08-28 14:43 ` Allen Curtis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).