A question about FEC on MPC860T

A question about FEC on MPC860T

[wdfhym]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1176 bytes --]


Dear sir:
I am in china.During my writting a driver for the FEC on the MPC860T board,I do not know how to configure the LXT970 PHY. The connections of pins are designed as following:
860T's port D pins are connected to LXT970's pins according to the user manual. 860T's port B pins are used as:PB15 to LXT970's CFG0,PB16 to CFG1,PB17 to LXT970's,FDE,PB18 to LXT970's RESET.In addition,The PC7 of 860's port C is connected to LXT970's TRSTE.
My version of embedded linux is 2.2.13 and the driver for fec is the file fec.c located in ./linux/arch/ppc/8xx_io.I have read fec.c carefully.I found that only the port D is set,but port B and port C are not set.
Could you help me to finish configuring the port B and C in fec.c?
Thank you very much.
Dafu wu
2002.09.04



______________________________________

===================================================================
ÐÂÀËÃâ·Ñµç×ÓÓÊÏä (http://mail.sina.com.cn)
ÐÂÀË·ÖÀàÐÅÏ¢£º¶þÊÖÊг¡×ßÒ»×ߣ¬¸Ã³öÊÖʱ¾Í³öÊÖ£¡ (http://classad.sina.com.cn/2shou/)
ÊýÍòÕÅÊÖ»úͼƬÊýÍòÊ׶ÌÐÅÁåÉùÈÎÄãÌôÑ¡£¬Ã¿Ì춼ÓиüР(http://sms.sina.com.cn/cgi-bin/sms/smspic.cgi)

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/