From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <20020904111431.7570.qmail@sina.com> From: wdfhym To: linuxppc-embedded@lists.linuxppc.org Subject: A question about FEC on MPC860T MIME-Version: 1.0 Date: Wed, 04 Sep 2002 19:14:31 +0800 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Dear sir: I am in china.During my writting a driver for the FEC on the MPC860T board,I do not know how to configure the LXT970 PHY. The connections of pins are designed as following: 860T's port D pins are connected to LXT970's pins according to the user manual. 860T's port B pins are used as:PB15 to LXT970's CFG0,PB16 to CFG1,PB17 to LXT970's,FDE,PB18 to LXT970's RESET.In addition,The PC7 of 860's port C is connected to LXT970's TRSTE. My version of embedded linux is 2.2.13 and the driver for fec is the file fec.c located in ./linux/arch/ppc/8xx_io.I have read fec.c carefully.I found that only the port D is set,but port B and port C are not set. Could you help me to finish configuring the port B and C in fec.c? Thank you very much. Dafu wu 2002.09.04 ______________________________________ =================================================================== 新浪免费电子邮箱 (http://mail.sina.com.cn) 新浪分类信息：二手市场走一走，该出手时就出手！ (http://classad.sina.com.cn/2shou/) 数万张手机图片数万首短信铃声任你挑选，每天都有更新 (http://sms.sina.com.cn/cgi-bin/sms/smspic.cgi) ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/