From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 6 Sep 2002 07:28:27 -0700 From: Tom Rini To: Lauri Ojantakanen Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Booting sandpoint from ide disk Message-ID: <20020906142827.GS761@opus.bloom.county> References: <200209051316.19309.lauri.ojantakanen@solidtech.com> <3D777C99.97AF4D14@mvista.com> <200209061102.58480.lauri.ojantakanen@solidtech.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <200209061102.58480.lauri.ojantakanen@solidtech.com> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Fri, Sep 06, 2002 at 11:02:58AM +0300, Lauri Ojantakanen wrote: > Instant need for booting from ide disk seem to have gone away :( Dink32 does > not start anymore at all. When I restart the machine nothing comes through > the serial cable (settings are correct). I have not touched to any board > switches. Red leds on the altimus board are as follows: Were you trying to put the kernel in flash or something? If you've got access to HW debuggers (like the Abatron BDI) look at what's at 0xFF00_0000, it should start off with a bunch of nop's. -- Tom Rini (TR1265) http://gate.crashing.org/~trini/ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/