* usb-storage.o - Unresolved symbol ppc_generic_ide_fix_driveid in 2.4.20-pre7-ben0
@ 2002-10-04 5:29 Robert E Brose II
2002-10-04 12:05 ` Benjamin Herrenschmidt
0 siblings, 1 reply; 3+ messages in thread
From: Robert E Brose II @ 2002-10-04 5:29 UTC (permalink / raw)
To: linuxppc-dev
Tried to get all the info in the title..
usb-storage.o - Unresolved symbol ppc_generic_ide_fix_driveid in 2.4.20-pre7-ben0
This worked in 2.4.19.
Ide is not enabled on this machine which is a SuperMac S900 (though if
I remember right, enabling it didn't make any difference).
Bob
--
/~\ The ASCII | Robert E. Brose II N0QBJ
\ / Ribbon Campaign | http://www.qbjnet.com/
X Help cure | mailto:bob@qbjnet.com
/ \ HTML Email | public key at http://www.qbjnet.com/key.html
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: usb-storage.o - Unresolved symbol ppc_generic_ide_fix_driveid in 2.4.20-pre7-ben0
2002-10-04 5:29 usb-storage.o - Unresolved symbol ppc_generic_ide_fix_driveid in 2.4.20-pre7-ben0 Robert E Brose II
@ 2002-10-04 12:05 ` Benjamin Herrenschmidt
2002-10-05 1:08 ` Robert E Brose II
0 siblings, 1 reply; 3+ messages in thread
From: Benjamin Herrenschmidt @ 2002-10-04 12:05 UTC (permalink / raw)
To: Robert E Brose II, linuxppc-dev
>Tried to get all the info in the title..
>
>usb-storage.o - Unresolved symbol ppc_generic_ide_fix_driveid in 2.4.20-
>pre7-ben0
>
>This worked in 2.4.19.
>
>Ide is not enabled on this machine which is a SuperMac S900 (though if
>I remember right, enabling it didn't make any difference).
It doeds make a difference, that function is only exported if you have
IDE enabled in the .config. However, if you just enable it and redo
the make, it may not work, as the actual export table may not be
rebuilt properly.
I suggest you enable IDE, backup .config, make distclean,
restore .config, make oldconfig, then make.
Ben.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: usb-storage.o - Unresolved symbol ppc_generic_ide_fix_driveid in 2.4.20-pre7-ben0
2002-10-04 12:05 ` Benjamin Herrenschmidt
@ 2002-10-05 1:08 ` Robert E Brose II
0 siblings, 0 replies; 3+ messages in thread
From: Robert E Brose II @ 2002-10-05 1:08 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
User Benjamin Herrenschmidt says:
> It doeds make a difference, that function is only exported if you have
> IDE enabled in the .config. However, if you just enable it and redo
> the make, it may not work, as the actual export table may not be
> rebuilt properly.
>
> I suggest you enable IDE, backup .config, make distclean,
> restore .config, make oldconfig, then make.
> Ben.
Ben, you are correct. It was the distclean et al.. I forgot about
that one. Also, if I remove the isd driver it works as well without
turning the ide drivers on...
Thanks a lot..
Bob
--
/~\ The ASCII | Robert E. Brose II N0QBJ
\ / Ribbon Campaign | http://www.qbjnet.com/
X Help cure | mailto:bob@qbjnet.com
/ \ HTML Email | public key at http://www.qbjnet.com/key.html
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2002-10-05 1:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-10-04 5:29 usb-storage.o - Unresolved symbol ppc_generic_ide_fix_driveid in 2.4.20-pre7-ben0 Robert E Brose II
2002-10-04 12:05 ` Benjamin Herrenschmidt
2002-10-05 1:08 ` Robert E Brose II
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).