From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Wed, 16 Oct 2002 19:27:12 +0200 From: Olaf Hering To: Benjamin Herrenschmidt Cc: Stefan Jeglinski , linuxppc-dev@lists.linuxppc.org Subject: Re: part deux Re: Radeon 7000 in 9500 - which slot? Message-ID: <20021016192712.A971@suse.de> References: <20021016121613.26836@192.168.4.1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20021016121613.26836@192.168.4.1> Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: begin On Wed, Oct 16, Benjamin Herrenschmidt wrote: > > >Have moved the 7000 to the top slot on the 9500, 2 monitors attached. > > > >When using 2.4.20-pre9-ben0, booting into RL3 (not troubleshooting X > >at this point) and kernel arg video=radeon:1024x768-16@75, the > >console boot briefly appears to start in accelerated mode, then the > >monitor goes black and stays that way. However, I can tell from > >listening to the disks that the boot proceeds normally. > > What kind of monitors ? 2 CRTs ? 1 LCD and 1 CRT ? > > The problem is apparently due to radeon_get_moninfo not finding > anything, can you eventually force rinfo->crtDisp_type to MT_CRT > and see if that helps ? I see something similar here. It does work when booting with BootX App, but not with miboot. Gruss Olaf -- $ man Notes BUGS You need http://www.sauerstoff-laden.de/ soon... ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/