LinuxPPC-Dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rini <trini@kernel.crashing.org>
To: Pantelis Antoniou <panto@intracom.gr>
Cc: Dan Malek <dan@embeddededge.com>,
	Paul Mackerras <paulus@au1.ibm.com>,
	joakim.tjernlund@lumentis.se, Matt Porter <porter@cox.net>,
	linuxppc-embedded@lists.linuxppc.org
Subject: Re: Regarding consistent_alloc
Date: Tue, 10 Dec 2002 10:49:11 -0700	[thread overview]
Message-ID: <20021210174911.GB14786@opus.bloom.county> (raw)
In-Reply-To: <3DF45D05.5030003@intracom.gr>


On Mon, Dec 09, 2002 at 11:06:13AM +0200, Pantelis Antoniou wrote:

[snip]
> Since I'm the one that started this thread let me make a few points.
>
> 1. The comment that consistent_alloc is tied to the PCI bus is valid,
> since the dma_handle is returned by a call to virt_to_bus(), with
> the virt_to_bus() being:
>
> /*
> * The PCI bus is inherently Little-Endian.  The PowerPC is being
> * run Big-Endian.  Thus all values which cross the [PCI] barrier
> * must be endian-adjusted.  Also, the local DRAM has a different
> * address from the PCI point of view, thus buffer addresses also
> * have to be modified [mapped] appropriately.
> */
> extern inline unsigned long virt_to_bus(volatile void * address)
> {
> #ifndef CONFIG_APUS
>        if (address == (void *)0)
>                return 0;
>        return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET;
> #else
>        return iopa ((unsigned long) address);
> #endif
> }

This is typically used by PCI, but look at the code for the !CONFIG_APUS
(ie just about every machine, including all 8xx) case.  This is the
iopa, that if classes haven't made me even more incoherent, that has
been mentioned throught the thread.

> Also the consistent_sync() takes as a direction argument values like
> PCI_DMA_FROMDEVICE.

This is unfortunate, but 'expected' for now.  These constants really
have nothing to do with PCI DMA, but DMA in general.  There was a hope
of fixing that in 2.5, but I don't recall if it happened (it might
have) yet.

> It has something obviously to do with a PCI bus. My board, and I believe
> most of the boards with a 8xx do not have a PCI bus.
>
> Is it possible to modify consistent_alloc to be something more
> generic?

It is already generic, it's just not obvious :(

> 2. I have a requirement to have my drivers loaded as modules.
> m8xx_cpm_hostalloc has a very simplistic implementation, which
> makes it unsuitable for something like that. I have some patches
> that fix both m8xx_cpm_hostalloc and 8xx_cpm_dpalloc by implementing
> a proper heap, with free space management and coalescing.
> What is the proper way to push them, and to whom?

<buck passing mode=on>Dan Malek still knows the most about the
8xx-specific portions of the kernel, so he should really speak up here
when he gets a moment</buck passing>

--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

  reply	other threads:[~2002-12-10 17:49 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-12-06 13:18 Regarding consistent_alloc Pantelis Antoniou
2002-12-06 13:23 ` Pantelis Antoniou
2002-12-06 14:25   ` Joakim Tjernlund
2002-12-06 15:59     ` Matt Porter
2002-12-06 16:08       ` Joakim Tjernlund
2002-12-06 18:30         ` Matt Porter
2002-12-06 18:15           ` Joakim Tjernlund
2002-12-06 18:52             ` Matt Porter
2002-12-06 19:59             ` Dan Malek
2002-12-06 22:11               ` Joakim Tjernlund
2002-12-07  0:16         ` Paul Mackerras
2002-12-07 12:53           ` Joakim Tjernlund
2002-12-07 16:53             ` Dan Malek
2002-12-09  9:06           ` Pantelis Antoniou
2002-12-10 17:49             ` Tom Rini [this message]
2002-12-11  3:52               ` acurtis
2002-12-11  8:57                 ` Joakim Tjernlund
2002-12-11  9:58                   ` Pantelis Antoniou
2002-12-11 14:41                     ` acurtis
2002-12-11 15:01                       ` Pantelis Antoniou
2002-12-11 15:36                         ` acurtis
2002-12-12  3:32                       ` Dan Malek
2002-12-11 14:56                     ` Tom Rini
2002-12-11 15:07                       ` Pantelis Antoniou
2002-12-12  3:41                         ` Dan Malek
2002-12-12  8:00                           ` Pantelis Antoniou
2002-12-12  8:18                             ` Wolfgang Denk
2002-12-12  8:37                               ` Pantelis Antoniou
2002-12-12 12:56                                 ` Is the preemptive kernel patch unsafe for 8xx/PPC? Joakim Tjernlund
2002-12-12 18:28                                   ` Eugene Surovegin
2002-12-12 20:35                                     ` Joakim Tjernlund
2002-12-13  4:12                                       ` acurtis
2002-12-13  6:09                                       ` Eugene Surovegin
2002-12-13  7:47                                         ` Joakim Tjernlund
2002-12-16 14:41                                           ` acurtis
2002-12-13  4:08                                     ` acurtis
2002-12-12 16:53                               ` "Missing" patches (Was: Re: Regarding consistent_alloc) Tom Rini
2002-12-06 16:56       ` Regarding consistent_alloc Dan Malek
2002-12-06 18:29         ` Matt Porter
2002-12-06 19:45           ` Dan Malek
2002-12-07  0:25           ` Paul Mackerras
2002-12-06 15:54 ` Matt Porter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20021210174911.GB14786@opus.bloom.county \
    --to=trini@kernel.crashing.org \
    --cc=dan@embeddededge.com \
    --cc=joakim.tjernlund@lumentis.se \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    --cc=panto@intracom.gr \
    --cc=paulus@au1.ibm.com \
    --cc=porter@cox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox