From mboxrd@z Thu Jan 1 00:00:00 1970 To: Steven Blakeslee Cc: "'Embedded Linux PPC List'" Subject: Re: 823 Video Controller Driver - where ? From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Thu, 19 Dec 2002 10:32:35 EST." Date: Thu, 19 Dec 2002 16:44:04 +0100 Message-Id: <20021219154409.3D609C6289@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message you wrote: > I appologize, you are correct. I sometimes think of LCD and video as the > same because I worked with a Lynx chip that allows both LCD and Video out > from the same buffer. Is it possible to use the 8xx LCD driver to drive the > video out? I believe the only section that needs to be changed is the > function that initializes the LCD registers, I may be off though. It's more complicated, since the video controller will not support a plain framebuffer, but only YUYV video mode. What happened to the video driver for the EP boards? It was available once on MV's FTP server - does not even EP has a copy any more? [Asking just out of curiousity, as we've already reimplemented all the stuff we needed - no NTSC support yet, though]. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de As far as we know, our computer has never had an undetected error. -- Weisert ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/