From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <200212231453.IAA20209@lists.linuxppc.org> From: "=?GB2312?Q?=D3=DA=E6=BA?=" To: "linuxppc-embedded@lists.linuxppc.org" Subject: Re: use bdi on board with ppcbug Mime-Version: 1.0 Content-Type: text/plain Date: Mon, 23 Dec 2002 22:58:26 +0800 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: hi! Thanks a lot! I know the where the entry of ppcbug is,but by testing not regular operation.My board's ppcbug entry is 0xfff04000,is it strange? And another question:when I use bdi2000 to debug the kernel,if I use 'next'command, the kernel will run until the end of the kernel(that is the whole start procedure).But the normal situation should be excuting a single instruction!Can anybody tell me Why? Thanks in advance > I want to debug the kernel on the motorola lopec p011 board with bdi >tools. And the first thing I must solve is to let the ppcbug "go" under >the bdi control. But I don't know where the entry of ppcbug is,so I >can't "go" the ppcbug. Has anybody know that?Or,the ppcbug can not be >run under this circumstances? yujing yuj@mail.ndsc.com.cn ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/