From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <20030113021509.36487.qmail@web41214.mail.yahoo.com> Date: Sun, 12 Jan 2003 18:15:09 -0800 (PST) From: Prakash kanthi Subject: Re: Smallest Initrd (ram disk) To: jpotter@dualg4.com Cc: LinuxPPC In-Reply-To: <3E0B88CA.1FB4AC55@wvi.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi, I downloaded both the ramdisks. I would appreciate, if you can tell me what should i have as the value for "root=", in Kernel Command Line. Mine shows as "Linux/PPC load: console=ttyS0,19200 console=tty1 ip=off root=/dev/part rw". And also, if i select the baud rate 19200, do i have to change anything in the linux code other than initial configuration file (defconfig). Thanks, Prakash --- Jim Potter wrote: > > Check out Wolfgang Denk's example ramdisk images at: > > ftp.denx.de/pub/LinuxPPC/usr/src/mini-2048kB-ramdisk.image.gz > ftp.denx.de/pub/LinuxPPC/usr/src/simple-ramdisk.image.gz > > > Hi folks, > > > > If i want to build a smallest possible initrd, can > you > > suggest where i can get it from or how i can build > it? > > I am working with a custom made PPC405 based board > > with just 8MB RAM. > > > > thanks, > > Prakash > > -- > Sincerely, > > Jim Potter > 45th Parallel Processing > > Firefighting: Bustin' ours, Savin' yours. > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/