From mboxrd@z Thu Jan 1 00:00:00 1970 To: "Xiaogeng (Shawn) Jin" Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: vmlinx and ppcboot From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Mon, 13 Jan 2003 10:09:29 PST." <3E2300D9.70307@redswitch.com> Date: Mon, 13 Jan 2003 19:44:54 +0100 Message-Id: <20030113184459.55ED3C608E@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <3E2300D9.70307@redswitch.com> you wrote: > > After 'make zImage', here comes the error message. zImage is not the correct build target if you intend to use U-Boot / PPCBoot. Try "make pImage" instead. > misc-embedded.o: In function `decompress_kernel': > misc-embedded.o(.text+0x28): undefined reference to `embed_config' > make[2]: *** [zvmlinux] Error 1 This is not appropriate for use with U-Boot / PPCBoot. > The comments on embed_config.c say that functions in that file are for > those embedded 8xx boards that do not have boot monitor support for Right. > Since I already have ppcboot running, I think I don't need any > embed_config stuff, or even boot stuff. Right? Right. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de The human mind treats a new idea the way the body treats a strange protein - it rejects it. - P. Medawar ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/