From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Thu, 30 Jan 2003 14:16:57 -0700 From: Matt Porter To: brian.auld@adic.com Cc: porter@cox.net, linuxppc-embedded@lists.linuxppc.org Subject: Re: Trying to use ELDK to build Ebony/440GP Message-ID: <20030130141657.B25221@home.com> References: <995FF289C9D69747A09E42992644595405B23635@penguin.adic.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <995FF289C9D69747A09E42992644595405B23635@penguin.adic.com>; from brian.auld@adic.com on Thu, Jan 30, 2003 at 01:02:59PM -0800 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Thu, Jan 30, 2003 at 01:02:59PM -0800, brian.auld@adic.com wrote: > Matt, > > Thanks for the response. I was pretty surprised myself and to say the least > am not having a very good day. > > Regarding the linuxppc_2_4_devel build attempt, these were the steps I took: > > In fact, I'm going to run it again on my linux box as I regurgitate the > steps I previuosly took: > > Prerequisites: > ============== > - running RH8.0 > - ELDK 2.0.2 installed with ppc_4xx tool chain (check) > - linuxppc_2_4_devel obtained from monte vista mirror (check) > (1) top-level Makefile hacked to read: > - ARCH := ppc > - CROSS_COMPILE = ppc_4xx- > (1) make mrproper > (2) make ebony_config > (3) make oldconfig > - I accept default(s) for about 10 options I'm prompted for. > (4) make dep > (5) make zImage > > When I run make zImage, I get the following error message: > /opt/eldk/usr/src/linuxppc_2_4_devel/include/linux/kernel.h:10: stdarg.h: No > such file or directory Interesting, it's not picking up stdarg.h from down in the gcc-lib/ hierarchy. Probably an ELDK install problem...hopefully Wolfgang is reading this thread since he should have a suggestion on what have might gone wrong with your installation. Regards, -- Matt Porter porter@cox.net This is Linux Country. On a quiet night, you can hear Windows reboot. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/