* Re: pcmcia microdrive support on 2.4.21-rev5 for arctic2
@ 2003-03-28 14:52 John F Davis
2003-03-31 1:43 ` David Gibson
0 siblings, 1 reply; 4+ messages in thread
From: John F Davis @ 2003-03-28 14:52 UTC (permalink / raw)
To: David Gibson; +Cc: linuxppc-embedded
Hello David,
You indeed are correct again. I made the change to the pcmcia config file
and it now associates the ide-cs.o with the microdrive. However, I still
have problems. It outputs the following message:
ide-cs: Get NextTuple: No more items
ide-cs: Get NextTuple: No more items
Also:
"fdisk /dev/hda" Says "unable to open /dev/hda"
I also don't see ide in the /proc/devices file. This sounds like a
problem.
Thanks again.
JD
Below is more detailed info:
# insmod pcmcia_core
Using /lib/modules/2.4.21-pre5/pcmcia/pcmcia_core.o
Linux Kernel Card Services 3.1.22
options: [pm]
# insmod pccf_4xx
Using /lib/modules/2.4.21-pre5/pcmcia/pccf_4xx.o
Warning: loading pccf_4xx will taint the kernel:pccf_4xx.c $Revision: 1.3 $
$Date
S:22:41 $ (Eric Van Hensbergen)
ee http://www.tux.org/lkml/#export-tainted for information about tainted
modules
# insmod ds
Using /lib/modules/2.4.21-pre5/pcmcia/ds.o
# cardmgr -v
cardmgr[28]: watching 1 sockets
# cardmgr[29]: starting, version is 3.2.4
# cardmgr[29]: initializing socket 0
cardmgr[29]: socket 0: ATA/IDE Fixed Disk
cardmgr[29]: product info: "IBM", "microdrive"
cardmgr[29]: manfid: 0x00a4, 0x0000 function: 4 (fixed disk)
cardmgr[29]: executing: 'modprobe ide-cs'
cardmgr[29]: + Using /lib/modules/2.4.21-pre5/pcmcia/pcmcia_core.o
cardmgr[29]: + Using /lib/modules/2.4.21-pre5/pcmcia/ds.o
cardmgr[29]: + Using /lib/modules/2.4.21-pre5/pcmcia/pcmcia_core.o
cardmgr[29]: + Using /lib/modules/2.4.21-pre5/kernel/drivers/ideide-cs:
/legacy/s
cardmgr[29]: get dev info on socket 0 failed: Resource temporarily
unavailable
# cat /etc/pcmcia/config
device "ide-cs"
class "ide" module "ide-cs"
#
# ATA/IDE fixed disk devices
#
card "ATA/IDE Fixed Disk"
function fixed_disk
bind "ide-cs"
# cat /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
13 input
29 fb
89 i2c
90 mtd
128 ptm
136 pts
162 raw
254 pcmcia
Block devices:
1 ramdisk
7 loop
31 mtdblock
93 nftl
# ls -l /dev/hda*
brw-r--r-- 1 0 0 3, 0 Mar 26 2003 /dev/hda
lrwxrwxrwx 1 0 0 3 Mar 19 2003 /dev/hda0 -> hda
brw-r--r-- 1 0 0 3, 1 Mar 26 2003 /dev/hda1
brw-r--r-- 1 0 0 3, 2 Feb 22 2003 /dev/hda2
# cat /proc/ide/drivers
ide-disk version 1.16
|---------+----------------------------->
| | David Gibson |
| | <david@gibson.drop|
| | bear.id.au> |
| | |
| | 03/27/2003 08:06 |
| | PM |
| | |
|---------+----------------------------->
>------------------------------------------------------------------------------------------------------------------------------|
| |
| To: John F Davis/Raleigh/IBM@ibmus |
| cc: linuxppc-embedded@lists.linuxppc.org |
| Subject: Re: pcmcia microdrive support on 2.4.21-rev5 for arctic2 |
| |
>------------------------------------------------------------------------------------------------------------------------------|
On Thu, Mar 27, 2003 at 06:29:33PM -0500, John F Davis wrote:
>
> Hello
>
> I am trying to get my microdrive working with 2.4.21.rev5. I have the
> following config options set:
> CONFIG_PCMCIA=m
> CONFIG_PCMCIA_PCCF_4xx=m
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
> CONFIG_BLK_DEV_IDECS=m
>
> I can insmod pcmcia_core, pccf_4xx, and ds.
>
> I built the latest pcmcia package from sourceforge in order to get
cardmgr.
>
> When I insert my microdrive, it says "insmod ide_cs.o" no module by that
> name found.
> I indeed do not have this module in my tree. What's the deal?
In recent kernels the name of the module has changed to ide-cs.o
--
David Gibson | For every complex problem there is a
david@gibson.dropbear.id.au | solution which is simple, neat and
| wrong.
http://www.ozlabs.org/people/dgibson
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: pcmcia microdrive support on 2.4.21-rev5 for arctic2
2003-03-28 14:52 pcmcia microdrive support on 2.4.21-rev5 for arctic2 John F Davis
@ 2003-03-31 1:43 ` David Gibson
0 siblings, 0 replies; 4+ messages in thread
From: David Gibson @ 2003-03-31 1:43 UTC (permalink / raw)
To: John F Davis; +Cc: linuxppc-embedded
On Fri, Mar 28, 2003 at 09:52:46AM -0500, John F Davis wrote:
>
> Hello David,
>
> You indeed are correct again. I made the change to the pcmcia config file
> and it now associates the ide-cs.o with the microdrive. However, I still
> have problems. It outputs the following message:
> ide-cs: Get NextTuple: No more items
> ide-cs: Get NextTuple: No more items
>
> Also:
> "fdisk /dev/hda" Says "unable to open /dev/hda"
>
> I also don't see ide in the /proc/devices file. This sounds like a
> problem.
Yes, the module has failed to initialize - I think this message
usually means that it's failed to find a configuration in the CIS that
it deems suitable. Why that's happened, I'm not so sure,
unfortunately.
--
David Gibson | For every complex problem there is a
david@gibson.dropbear.id.au | solution which is simple, neat and
| wrong.
http://www.ozlabs.org/people/dgibson
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread
* pcmcia microdrive support on 2.4.21-rev5 for arctic2
@ 2003-03-27 23:29 John F Davis
2003-03-28 1:06 ` David Gibson
0 siblings, 1 reply; 4+ messages in thread
From: John F Davis @ 2003-03-27 23:29 UTC (permalink / raw)
To: linuxppc-embedded
Hello
I am trying to get my microdrive working with 2.4.21.rev5. I have the
following config options set:
CONFIG_PCMCIA=m
CONFIG_PCMCIA_PCCF_4xx=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDECS=m
I can insmod pcmcia_core, pccf_4xx, and ds.
I built the latest pcmcia package from sourceforge in order to get cardmgr.
When I insert my microdrive, it says "insmod ide_cs.o" no module by that
name found.
I indeed do not have this module in my tree. What's the deal?
FWIW, I tried building 2.4.17 kernel from kernel.org but it had the same
result.
JD
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: pcmcia microdrive support on 2.4.21-rev5 for arctic2
2003-03-27 23:29 John F Davis
@ 2003-03-28 1:06 ` David Gibson
0 siblings, 0 replies; 4+ messages in thread
From: David Gibson @ 2003-03-28 1:06 UTC (permalink / raw)
To: John F Davis; +Cc: linuxppc-embedded
On Thu, Mar 27, 2003 at 06:29:33PM -0500, John F Davis wrote:
>
> Hello
>
> I am trying to get my microdrive working with 2.4.21.rev5. I have the
> following config options set:
> CONFIG_PCMCIA=m
> CONFIG_PCMCIA_PCCF_4xx=m
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
> CONFIG_BLK_DEV_IDECS=m
>
> I can insmod pcmcia_core, pccf_4xx, and ds.
>
> I built the latest pcmcia package from sourceforge in order to get cardmgr.
>
> When I insert my microdrive, it says "insmod ide_cs.o" no module by that
> name found.
> I indeed do not have this module in my tree. What's the deal?
In recent kernels the name of the module has changed to ide-cs.o
--
David Gibson | For every complex problem there is a
david@gibson.dropbear.id.au | solution which is simple, neat and
| wrong.
http://www.ozlabs.org/people/dgibson
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-03-31 1:43 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-03-28 14:52 pcmcia microdrive support on 2.4.21-rev5 for arctic2 John F Davis
2003-03-31 1:43 ` David Gibson
-- strict thread matches above, loose matches on Subject: below --
2003-03-27 23:29 John F Davis
2003-03-28 1:06 ` David Gibson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).