From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <20030512222504.6830.qmail@kunk.qbjnet.com> Subject: 3Ware controller on PREP error To: linuxppc-dev@lists.linuxppc.org Date: Mon, 12 May 2003 17:25:04 -0500 (CDT) From: Robert E Brose II MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: I'm running debian 3.0 on this machine with a 2.4.20-benh10 kernel. It's a 43p 133. The controller is a 3ware 7000 that I've used with intel linux before. I'm trying to get a hardware raid controller working. I tried a Adaptec 3200s, the machine freezes during PCI bus scans with that in. The 3ware ide raid controller gets past that part but still doesn't work. For reference a 2940uw works fine. dmesg says this: PCI: Probing PCI hardware Scanning bus 00 Found 00:00 [1057/0001] 000600 00 Found 00:58 [1014/000a] 000601 00 Found 00:60 [1022/2000] 000200 00 Found 00:70 [5333/88c1] 000001 00 Fixup res 6 (7200) of dev 00:0e.0: c0000 -> c00c0000 Found 00:80 [1000/0001] 000100 00 Fixup res 1 (200) of dev 00:10.0: 80000 -> c0080000 Found 00:90 [13c1/1001] 000104 00 Found 00:b0 [9004/8178] 000100 00 Fixups for bus 00 Bus scan for 00 returning with max=00 IBM ID: 000000f7 Setting PCI interrupts for a "IBM PS830/PS850/7248 (Carolina)" Relocating PCI address 20000000 -> 1000000 resource conflict with: 3c0..3df (0), name: vga+ PCI:00:0b.0: Resource 0: 00001000-00001007 (f=101), vd: 1014, dev: 000a PCI:00:0c.0: Resource 0: 01000200-0100021f (f=101), vd: 1022, dev: 2000 PCI:00:10.0: Resource 0: 01000000-010000ff (f=101), vd: 1000, dev: 0001 PCI:00:10.0: Resource 1: c0080000-c00800ff (f=200), vd: 1000, dev: 0001 3ware Storage Controller device driver for Linux v1.02.00.031. PCI: Enabling device 00:12.0 (0000 -> 0003) 3w-xxxx: tw_aen_drain_queue(): Unexpected request id. 3w-xxxx: AEN drain failed for card 0. 3w-xxxx: tw_aen_drain_queue(): Unexpected request id. 3w-xxxx: AEN drain failed for card 0. 3w-xxxx: tw_aen_drain_queue(): Unexpected request id. 3w-xxxx: AEN drain failed for card 0. 3w-xxxx: Controller errors, card not responding, check all cabling for card 0. 3w-xxxx: No cards with valid units found. lspci -v says this: 00:12.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01) Subsystem: 3ware Inc 3ware 7000-series ATA-RAID Flags: medium devsel, IRQ 15 I/O ports at 1010 [size=16] Memory at c0000020 (32-bit, non-prefetchable) [size=16] Memory at c1000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at [disabled] [size=64K] Capabilities: [40] Power Management version 1 Thanks for any pointers... Bob -- /~\ The ASCII | Robert E. Brose II N0QBJ \ / Ribbon Campaign | http://www.qbjnet.com/ X Help cure | mailto:bob@qbjnet.com / \ HTML Email | public key at http://www.qbjnet.com/key.html ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/