From: "rick.liu" <dovi@eyou.com>
To: linuxppc-embedded@lists.linuxppc.org
Subject: Why my console output nothing
Date: 13 May 2003 16:05:15 +0800 [thread overview]
Message-ID: <20030513160515.79677.qmail@eyou.com> (raw)
Hi all
I am using ELDK to port linux to a simple MPC860T board. I use SMC1 to
connect to the serial port and as the console.But I can't go any further
because when i powerup,the console doesnot show any message.List my steps
here:
1. edit ~/.kermrc as what was shown in <Denx ppcboot and linux
Guide(tqm8xxl)>.
2. modify several line of 'TQM860L.h'.
3. modify my UPM table and register OR1/BR1 to OR4/BR4(my sdram uses
cs4) in the file tqm8xx.c.
4. bash>make distclean.
5. bash>make TQM860L_config.
7. bash>make all
8. use a flash programmer to burn the u-boot.bin to my boot flash.
9. bash>kermit -c
Connecting to /dev/ttyS0, speed 115200
Escape character:xxxxxxxxxxxxxxx :enabled
Type xxxxxxxxxxxxxxxxxxxxxxxxxxx to got back
or xxxxxxxxxxxxxxxxxxxxxxxxxxxxx options
--------------------------------------
10.power up,but nothing is output.
PS:my board info:MPC860T/SCC1 ETHERNET/SMC1 Serial/PCMCIA/CS0 FLASH 0/CS4
SDRAM
It's my first time to build a embedded linux project,wish u can help me out.
Thanks a lot!
Best regards!
--http://www.eyou.com
--Îȶ¨¿É¿¿µÄÃâ·Ñµç×ÓÐÅÏä ÓïÒôÓʼþ Òƶ¯ÊéÇ© ÈÕÀú·þÎñ ÍøÂç´æ´¢...ÒÚÓÊδ¾¡
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2003-05-13 8:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-13 8:05 rick.liu [this message]
2003-05-13 13:46 ` Why my console output nothing Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2003-05-14 7:27 rick.liu
2003-05-14 8:10 ` Wolfgang Denk
2003-05-14 12:45 ` Bret Indrelee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030513160515.79677.qmail@eyou.com \
--to=dovi@eyou.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).