From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Mon, 19 May 2003 11:30:33 +0200 From: Peter Vandenabeele To: bob piatek Cc: emanuel stiebler , linuxppc-embedded@lists.linuxppc.org Subject: Re: Virtex II Pro eval Boards Message-ID: <20030519113032.D21768@mind.be> Reply-To: Peter Vandenabeele References: <3EC568D2.6020905@ecubics.com> <5668A00E-87FA-11D7-AD26-000393D6CBAE@fishcamp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <5668A00E-87FA-11D7-AD26-000393D6CBAE@fishcamp.com>; from bobtek@fishcamp.com on Fri, May 16, 2003 at 04:58:49PM -0700 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Fri, May 16, 2003 at 04:58:49PM -0700, bob piatek wrote: > > Insight electronics has a V2Pro evaluation card that is bare bones: > > http://www.insight.memec.com/cgi-bin/bvutf8/memec/scripts/local/ > mc_loc_b.jsp?Div=INSIGHT&Reg=AMERICAS&Country=UNITED_STATES&Lang=EN&isDe > tailPage=true&EDOID=200910&Manu=MD_XILINX I figured out http://www.insight.memec.com/virtex2pro/ is a short-cut for this ... > It's a lot cheaper than the Xilinx ML300 but, of course, doesn't do as > much. You can get daughter cards for it to support things like > Ethernet, CompactFlash, etc. I understand that 'Mind' has ported > PPCBoot and Linux to the card: > > http://mind.be/library/software/ That was an old port to a development board (ML2). Our port to the Memec Evaluation board is not ready yet, Peter -- Peter Vandenabeele Mind: Embedded Linux and eCos Development -- http://mind.be ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/