From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Wed, 21 May 2003 20:59:20 -0700 From: Matt Porter To: ?????? Cc: "Mark A. Greer" , linuxppc-embedded@lists.linuxppc.org Subject: Re: how to kernel booting on MCP750 board Message-ID: <20030521205920.A10342@home.com> References: <000b01c31f5a$fcfc80b0$346ab796@corebellhychon> <3ECBC077.2030903@mvista.com> <000601c32006$5222a280$346ab796@corebellhychon> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <000601c32006$5222a280$346ab796@corebellhychon>; from hychon@corebell.co.kr on Thu, May 22, 2003 at 11:03:15AM +0900 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Thu, May 22, 2003 at 11:03:15AM +0900, ?????? wrote: > > Thanks your answer. > But you are misunderstand my-Question, > > I'm working that is booting kernel on MCP750 target board. > But it not do good working. it's display following error. > === Error Message ============== > PPC1-Bug> > PPC1-Bug>nbo 0 0 10.10.10.2 10.10.10.1 vmlinux.bin > Network Booting from: DEC21140, Controller 0, Device 0 > Device Name: /pci@80000000/pci1011,9@e,0:0,0 > Loading: vmlinux.bin > Residual-Data Located at: $01F88000 > > Exception: Program (Illegal Instruction) RTFM. :) The MontaVista LSP instructions specifically say to go to the ENV settings and enable "network PReP boot". This has also been answered countless times in the list archives. BTW, you first mentioned a "motorola mpc750" board and then you properly referred to an mcp750. mpc750 is a processor. mcp750 is the cPCI board from MCG. Regards, -- Matt Porter mporter@kernel.crashing.org ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/