bdi problem with 4xx

bdi problem with 4xx

[Brian Kuschak]

On the BDI, after issuing 'reset' to a 440GX or 440GP
eval board.

- CONFIG: loading configuration file passed
- CONFIG: loading register definition passed
- TARGET: processing user reset request
- TARGET: reseting target passed
- TARGET: processing target startup ....
*** TARGET: processing target startup failed
# PPC: timeout while waiting for freeze
- TARGET: target will be restarted in 10 sec
BDI>

Even a minimal configuration file has the same
problem.  I'm waiting to hear back from Abatron, but
maybe someone here knows the solution??

Thanks,
Brian


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: bdi problem with 4xx

[Wolfgang Denk]

In message <20030708171911.26511.qmail@web40911.mail.yahoo.com> you wrote:
>
> - TARGET: processing target startup ....
> *** TARGET: processing target startup failed
> # PPC: timeout while waiting for freeze
> - TARGET: target will be restarted in 10 sec
> BDI>
>
> Even a minimal configuration file has the same
> problem.  I'm waiting to hear back from Abatron, but
> maybe someone here knows the solution??

This may be a hardware problem, but more often it is just an error in
your config file. Bt without knowing the  hardware  and  your  config
file there is little we can do...


Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
"The X11 source code style is ATROCIOUS and should not be used  as  a
model."                                                   - Doug Gwyn

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/