From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 11 Jul 2003 10:24:32 +1200 From: Rod Boyce To: Dmytro Bablinyuk Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: telnetd: All network ports in use! Message-Id: <20030711102432.3024885b.rod_boyce@stratexnet.com> In-Reply-To: <3F0DDB97.2060902@tait.co.nz> References: <3F0DDB97.2060902@tait.co.nz> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I have sorted out this exact problem 2 weeks or so ago. For me the problem was that the device node telnet was trying to obtain did not exist on my filesystem. Look in /dev for device nodes ttyp* this is what they look like in my file system: crw------- 1 root root 3, 0 May 7 2002 ttyp0 I have added 16 of them. Regards, Rod Boyce On Fri, 11 Jul 2003 09:33:11 +1200 Dmytro Bablinyuk wrote: > > Finally we got u-boot with linux working, but I am experiencing problem with telnetd: "telnetd: All network ports in use!" > I've seen around quite a few reports about the same problem but no one solution really works. > Below I attached some info about my system in hope that somebody may be come across this problem. > Thank you in advance for any help. > ------- > / # cat /etc/fstab > # /etc/fstab: static file system information. > # > # > /dev/root / ext2 rw,noauto 0 1 > tmpfs /tmp tmpfs defaults 0 0 > > none /proc proc defaults 0 0 > none /dev/pts devpts mode=0620 0 0 > ------- > / # mount > /dev/ram0 on / type ext2 (rw) > /proc on /proc type proc (rw) > tmpfs on /tmp type tmpfs (rw) > none on /dev/pts type devpts (rw) > ------- > / # netstat -a > Active Internet connections (servers and established) > Proto Recv-Q Send-Q Local Address Foreign Address State > tcp 0 0 *:telnet *:* LISTEN > Active UNIX domain sockets (servers and established) > Proto RefCnt Flags Type State I-Node Path > unix 2 [ ] DGRAM 51 /dev/log > / # > ------- > ## Transferring control to Linux (at address 00000000) ... > Linux version 2.4.21-erik (root@sardine.tait.co.nz) (gcc version 3.3) #35 Thu Jul 10 19:39:05 NZST 2003 > On node 0 totalpages: 2048 > zone(0): 2048 pages. > zone(1): 0 pages. > zone(2): 0 pages. > Kernel command line: root=/dev/ram rw > Decrementer Frequency = 187500000/60 > Calibrating delay loop... 49.86 BogoMIPS > Memory: 6196k available (848k kernel code, 344k data, 48k init, 0k highmem) > Dentry cache hash table entries: 1024 (order: 1, 8192 bytes) > Inode cache hash table entries: 512 (order: 0, 4096 bytes) > Mount cache hash table entries: 512 (order: 0, 4096 bytes) > Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) > Page-cache hash table entries: 2048 (order: 1, 8192 bytes) > POSIX conformance testing by UNIFIX > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Starting kswapd > CPM UART driver version 0.03 > ttyS00 at 0x0280 is a SMC > pty: 2048 Unix98 ptys configured > eth0: FEC ENET Version 0.2, FEC irq 3, MII irq 4, addr 00:24:20:10:18:6a > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 512 buckets, 4Kbytes > TCP: Hash tables configured (established 512 bind 1024) > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > RAMDISK: Compressed image found at block 0 > Freeing initrd memory: 644k freed > VFS: Mounted root (ext2 filesystem). > Freeing unused kernel memory: 48k init > init started: BusyBox v0.61.pre (2003.07.10-04:42+0000) multi-caip: RTNETLINK answers: File exists > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/