From mboxrd@z Thu Jan 1 00:00:00 1970 To: Eli Brin Cc: "'linuxppc-embedded@lists.linuxppc.org'" Subject: Re: Access u-boot environment variables from Linux From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Mon, 14 Jul 2003 12:18:17 +0200." <75DF04AC5ED4D511A9810090273CB4163F5DE2@rokonet-e.rokonet.co.il> Date: Mon, 14 Jul 2003 12:13:39 +0200 Message-Id: <20030714101344.67427C6D82@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Dear Eli, in message <75DF04AC5ED4D511A9810090273CB4163F5DE2@rokonet-e.rokonet.co.il> you wrote: > > >Hardware Information Block which can be installed at offset > >0x0003FFC0 in the first flash bank? > > Yes, but our final target will use 0x0003FF00, so we can have more > space. We are making our target as compatible as possible to the > TQM860L. Well, if you move the address, you're breaking compatibility anyway. Feel free to implement a proprietary solution that fits your needs. > Perhaps, and probably, you are right. I will re-check/re-think. It > looks easier to make changes on the SELF scripts. And it can be used > on Linux version that do not support the ELDK rebuild from scratch. Agreed. > Anyway, my original problem is solved :) . I use the /tools/env, and > perhaps later the MTD patch. Fine. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de In C we had to code our own bugs, in C++ we can inherit them. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/