From: Wolfgang Denk <wd@denx.de>
To: Steven Scholz <steven.scholz@imc-berlin.de>
Cc: LinuxPPC <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: PCMCIA Modem/Serial Cards and MPC8xx?
Date: Wed, 27 Aug 2003 12:37:58 +0200 [thread overview]
Message-ID: <20030827103803.3C471C59E4@atlas.denx.de> (raw)
In-Reply-To: Your message of "Tue, 26 Aug 2003 12:40:13 +0200." <3F4B390D.1060101@imc-berlin.de>
Dear Steven,
in message <3F4B390D.1060101@imc-berlin.de> you wrote:
>
> is someone using a PCMCIA Modem or Serial Port card with an MPC8xx system?
Yes, we tested this on a couple of boards, including a TQM8xxL board.
> I build a kernel for a TQM860L based board enabeling CONFIG_SERIAL=y
> as the PCMCIA HowTo states. (I also have CONFIG_SERIAL_CONSOLE=y). But
> while booting (or insmod serial.o) I get :
So far, this is only supported by our linux-2.4 kernel (normally, the
8xx UART driver and the standard serial driver [as needed for the
modem] will cause conflicts; these are trivially to fix, though).
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Bus error -- driver executed.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2003-08-27 10:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-26 10:40 PCMCIA Modem/Serial Cards and MPC8xx? Steven Scholz
2003-08-26 11:14 ` Magnus Damm
2003-08-27 10:38 ` Wolfgang Denk
2003-08-27 10:37 ` Wolfgang Denk [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-08-26 21:40 Rod Boyce
2003-08-27 9:17 ` Steven Scholz
2003-08-27 10:44 ` Wolfgang Denk
2003-08-27 11:12 ` Steven Scholz
2003-08-27 11:50 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030827103803.3C471C59E4@atlas.denx.de \
--to=wd@denx.de \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=steven.scholz@imc-berlin.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).