From mboxrd@z Thu Jan 1 00:00:00 1970 To: Steven Blakeslee Cc: "'Qsyang'" , linuxppc-embedded@lists.linuxppc.org Subject: Re: debug irregularly! From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Fri, 29 Aug 2003 09:56:49 EDT." Date: Fri, 29 Aug 2003 16:01:17 +0200 Message-Id: <20030829140122.82622C59E4@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message you wrote: > > Most likely you are compiling with optimization enabled. This can cause the > c code to execute in a different sequence than you wrote. Right.... > when i debug(debugger=BDI2000;cpu=8xx) U-boot in flash, it > jumps irregularly as it running into "C" code, which always trouble me > -<. How can i get a "normal" debug sequence? is it need to add some > debug parameter into config.mk? See also: http://www.denx.de/twiki/bin/view/DULG/DebuggingTricks Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Don't put off for tomorrow what you can do today, because if you enjoy it today you can do it again tomorrow. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/