From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <200309040128.UAA25464@lists.linuxppc.org> From: "Yuxiao Xi" To: Tom Rini Cc: "linuxppc-embedded@lists.linuxppc.org" Subject: Re: DINK32 R13.1 on Sandpoint X2 Mime-Version: 1.0 Content-Type: text/plain Date: Thu, 4 Sep 2003 09:37:40 +0800 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi,Tom, From the mailing lists,I know that someone use DINK32's tftp download function to download his image successfully on a Sandpoint X3 board.Is there any important differences between Sandpoint X3 and X2 board so that I can not use the DINK32's tftp function on X2 board? ======= 2003-09-03 11:04:00 £º======= >On Tue, Sep 02, 2003 at 05:22:08PM +0800, Yuxiao Xi wrote: > >> Now I'm working on a Motorola Sandpoint X2 board with ppc8240. >> I use DINK32 r13.1 to boot my linux kernel image. From DINK32 r13.1 >> user manual,I know that DINK32 r13.1 supports ethernet card Realtek >> 8139,but after these steps: > >What I would suggest is that instead of using the ethernet card >support, you use the serial support still. DINK32 r13.0.0 and newer >support 115200 baud, so loading a kernel via serial is now much less >painful than it used to be. = = = = = = = = = = = = = = = = = = = = ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡Yuxiao Xi ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡xiyuxiao@harbournetworks.com ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2003-09-04 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/