* cpm_handler
@ 2003-09-25 11:27 somshekar chandrashekar kadam
0 siblings, 0 replies; 2+ messages in thread
From: somshekar chandrashekar kadam @ 2003-09-25 11:27 UTC (permalink / raw)
To: linuxppc-embedded
HI ,
I am not on this mailing list i have subscribed to it , ineed
yet to receive the acknowledgement ,
before that i need to solve a problem ,
once my MPC860 calls rs_8xx_init , once cpm_handler_init is
called
i dont get any of the prints on the console , in kernel
configuration ,
i have choosen only smc2 , where else i need to specify touse SMC2
, please any one can throw some light on this , here are my kernel
messages
Thanks And regards
NEELU
--------------------------------------
Decrementer Frequency = 187500000/60
Calibrating delay loop... 49.76 BogoMIPS
Memory: 6892k available (808k kernel code, 296k data, 40k init, 0k
highmem)
Dentry-cache hash table entries: 1024 (order: 1, 8192 bytes)
Inode-cache hash table entries: 512 (order: 0, 4096 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
POSIX conformance testing by UNIFIX
IN init ok
IN do_basic setup
in SOCK_INIT
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
before do_initcalls
Starting kswapd
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
state->irq = 4
ENtering m8xx_cpm_hostalloc
in SMC
Entering inatll interrupt handler
Entering m8xx_cpm_setbrg
AFTER CPM SETBRG
ttyS01 at 0x0380 is a SMC
state->irq = 3
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* cpm_handler
@ 2003-09-25 11:28 somshekar chandrashekar kadam
0 siblings, 0 replies; 2+ messages in thread
From: somshekar chandrashekar kadam @ 2003-09-25 11:28 UTC (permalink / raw)
To: linuxppc-embedded
HI ,
I am not on this mailing list i have subscribed to it , ineed
yet to receive the acknowledgement ,
before that i need to solve a problem ,
once my MPC860 calls rs_8xx_init , once cpm_handler_init is
called
i dont get any of the prints on the console , in kernel
configuration ,
i have choosen only smc2 , where else i need to specify touse SMC2
, please any one can throw some light on this , here are my kernel
messages , please do a cc to this mail ID ,please
Thanks And regards
NEELU
--------------------------------------
Decrementer Frequency = 187500000/60
Calibrating delay loop... 49.76 BogoMIPS
Memory: 6892k available (808k kernel code, 296k data, 40k init, 0k
highmem)
Dentry-cache hash table entries: 1024 (order: 1, 8192 bytes)
Inode-cache hash table entries: 512 (order: 0, 4096 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
POSIX conformance testing by UNIFIX
IN init ok
IN do_basic setup
in SOCK_INIT
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
before do_initcalls
Starting kswapd
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
state->irq = 4
ENtering m8xx_cpm_hostalloc
in SMC
Entering inatll interrupt handler
Entering m8xx_cpm_setbrg
AFTER CPM SETBRG
ttyS01 at 0x0380 is a SMC
state->irq = 3
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-09-25 11:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-09-25 11:28 cpm_handler somshekar chandrashekar kadam
-- strict thread matches above, loose matches on Subject: below --
2003-09-25 11:27 cpm_handler somshekar chandrashekar kadam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).