From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Thu, 2 Oct 2003 12:33:56 -0700 From: Matt Porter To: Dan Malek Cc: Matt Porter , Stuart Vivian , linuxppc-embedded@lists.linuxppc.org Subject: Re: Linux 2_4_devel kernel hangs after control transferred from u-boot Message-ID: <20031002123356.C29772@home.com> References: <20031002081201.A2929@home.com> <3F7C59AA.8090707@embeddededge.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <3F7C59AA.8090707@embeddededge.com>; from dan@embeddededge.com on Thu, Oct 02, 2003 at 01:00:26PM -0400 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Thu, Oct 02, 2003 at 01:00:26PM -0400, Dan Malek wrote: > > Matt Porter wrote: > > > Hrm, it used to be that everybody said their board was "just like > > a Sandpoint". I guess walnut is like that in the 4xx world. :) > > I did the port for this board over a year ago and gave it to a > few people that were going to "finish it and check it in"....I > guess that didn't happen. Lemme see what I can do about getting > ftp running on my server again and I'll point you to the tarball.... That should save him some time. Any other ports to standard boards you have laying around? :) > The only thing similar to a Walnut is it uses a 405GP, there is > nothing else similar to a Walnut...... Yup, that makes it just like a Walnut similar to the way that every MPC750/MPC107 board is just like a Sandpoint. -Matt ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/