Re: relocate code

Re: relocate code

[Wolfgang Denk]

In message <20031011071322.23815.qmail@webmail28.rediffmail.com> you wrote:
>
>
> --Next_1065856402---0-203.199.83.38-23744
> Content-type: text/html;
> 	charset=iso-8859-1
> Content-Transfer-Encoding: quoted-printable
> Content-Disposition: inline

Arghhh.... Please don't post HTML to the  mailing  list.  Send  plain
text only.

>  I have ppcboot-2.0.0 working on 8mb SDRAM ,
> now i have moved to same type of board with 32mb SDRAM , with U-boot,

You are off topic here. You should rather ask questions like this  on
the U-Boot-users mailing list.

> my code gets hanged in relocate code , sdram pattern i swritten properly, and intilaized ,

> ANY ideas please suggest , i dont get whats going wrong

Your SDRAM initialization is broken.

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
If in any problem you find yourself doing an immense amount of  work,
the answer can be obtained by simple inspection.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/