From mboxrd@z Thu Jan 1 00:00:00 1970 To: "somshekar chandrashekar kadam" Cc: linuxppc-embedded@lists.linuxppc.org, "Joao Vicente" Subject: Re: relocate code From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "11 Oct 2003 07:13:22 -0000." <20031011071322.23815.qmail@webmail28.rediffmail.com> Date: Sat, 11 Oct 2003 16:32:28 +0200 Message-Id: <20031011143233.925CBC59E4@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <20031011071322.23815.qmail@webmail28.rediffmail.com> you wrote: > > > --Next_1065856402---0-203.199.83.38-23744 > Content-type: text/html; > charset=iso-8859-1 > Content-Transfer-Encoding: quoted-printable > Content-Disposition: inline Arghhh.... Please don't post HTML to the mailing list. Send plain text only. > I have ppcboot-2.0.0 working on 8mb SDRAM , > now i have moved to same type of board with 32mb SDRAM , with U-boot, You are off topic here. You should rather ask questions like this on the U-Boot-users mailing list. > my code gets hanged in relocate code , sdram pattern i swritten properly, and intilaized , > ANY ideas please suggest , i dont get whats going wrong Your SDRAM initialization is broken. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de If in any problem you find yourself doing an immense amount of work, the answer can be obtained by simple inspection. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/