From mboxrd@z Thu Jan 1 00:00:00 1970 To: "Santosh Raj B" Cc: "emb linux" Subject: Re: BSP for ppc750 From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Fri, 07 Nov 2003 17:40:24 +0530." <00c101c3a535$638ab3f0$0100a8c0@rnd> Date: Fri, 07 Nov 2003 14:56:16 +0100 Message-Id: <20031107135621.1323FC5F59@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <00c101c3a535$638ab3f0$0100a8c0@rnd> you wrote: > > Any clues on differences b/w ppc750 and mpc750. I have a PPC750 board but a > MPC750 BSP, could I use this BSP As the name BSP (= BOARD support package) suggests a BSP deals with the special features of a board, not with a specific processor model. You cannot use a BSP for one board on another, different board without making certain modifications (a process often called "porting") - no matter if the two bards use the same processor or not. [Well, it may be easier if both use the same CPU.] Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de "It's when they say 2 + 2 = 5 that I begin to argue." - Eric Pepke ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/